Yamaha Star Stryker banner

240 tire with 2.25 lowering kit.

4889 Views 18 Replies 12 Participants Last post by  strykenshane
I know it has been discussed numerous times but I am having a hard time finding a direct answer. I want to put a 240 on the rear. Am I going to have any problems or issues with bottoming out or rubbing with the bike lowered with the PCS lowering kit set at the 2.25 lowered position while riding 2 up? Thanks so much.
1 - 2 of 19 Posts
Couldn't have said it better myself,Bozzly ;D I've seen some adjustable dogbones out there, that is what I'd recomend using, that way no matter what tire you get you can safely drop it as low as possible! The set I want to buy are built like a tierod so you just loosen and adj.
Bozz, I saw a pair on ebay that I liked, just needed to check on diamentions. Ya, the PCS do look a little weak. The tierod style were about $80 if I remember right. Of course I saw them after I allready bought a pair,but thats usually the way it goes.
1 - 2 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top