[B-Rad]

Those that have Ivan's ECU flash, do you still need/run the 30 tooth pulley? Anyone go back to the 31 tooth? Any input on the subject for discussion?? Thanks

 

[BillyD66]

I still run the 30 tooth. I remember 11 posting that he went back to the 31 and then back again to the 30 but he'll probably see this and reply. In that thread or another we discussed rpms at highway plus speeds w/ the 30 vs. 31.
To me the extra oomph at the lower speeds/gears is more than worth a few extra RPM's on the whole range and possibly a trivial loss at the very top end.

 

[11Stryker]

I still run the 30 tooth. I remember 11 posting that he went back to the 31 and then back again to the 30 but he'll probably see this and reply. In that thread or another we discussed rpms at highway plus speeds w/ the 30 vs. 31.
To me the extra oomph at the lower speeds/gears is more than worth a few extra RPM's on the whole range and possibly a trivial loss at the very top end.

Dead on Billy!!:nod:

 

[DraEagWol]

++1 - I agree with Billy & 11! I run with the Flash & 30 Tooth - love it.

 

[motoxr392]

I'm flashed and 30 tooth, and haven't looked back since.

 

[11Stryker]

I'm flashed and 30 tooth, and haven't looked back since.

Best 2 mods for the Stryker IMO.

 

[Jac]

I have just bought my stryker and I'm loving the ride but would like to know why it crakes into gear when stopped and then second and third .... is this a setting thing revs too high ??


Sent from my iPhone using Tapatalk

 

[Dizazter68]

Hey bro, I think you auto correct was on, didn't get what you wanted to say. Where are you from?

 

[Jac]

When I put the bike into gear it makes a loud crack noise it dose this in 1st to 3rd gear then it's ok
I was told this is normal


Sent from my iPhone using Tapatalk

 

[Banshee315]

How many of you with the flash and 30T are running a 240 rear?

 

[DraEagWol]

How many of you with the flash and 30T are running a 240 rear?

Just about all of us...('cept 11 because he runs a 300 or something huge like that... lol)

 

[mrdub27]

JAC ...

The first gear clunk is normal.. but the others.. might be a badly adjusted clutch( too loose not enough pull or oil issue. I run 15w40 Rotella conventional . smooths out the shifts but not quite perfect ..it's ayamaha thing i think.

 

[MrRuss]

i have the flash but i may want to do this pulley swap. i wont need to reflash would i?

 

[11Stryker]

i have the flash but i may want to do this pulley swap. i wont need to reflash would i?

No need for reflash

 

[MrRuss]

No need for reflash

:thumb: