[Frag]

Hi guys,

I would be interested in that light and I need some help here.

I feel dumb for asking but ...I just want to confirm.

This light take an H1 bulb and I know that the stryker is an H4. I understand that in the end it should not be a problem since the bulb is in fact part of the complete headlight but ... will I face some electrical problem to fit this light to the stryker? It is not really clear to me how the high / low beam electrical setup works.

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=360461642665

My plan in to put a DDM Tuning HID kit in it. 9004 bulb (Compatible to H1 bulb), 55 watts, 6000k. That headlight has a 75 watts halogen bulb!!! So I guess it can handle a 55 watts HID bulb.

http://www.ddmtuning.com/Products/DDM-35W-55W-Single-HiLo-Motorcycle-HID-Kit

Do you guys see any problems in my project.

...ho and for sure, I will paint the headlight to fit

 

[Natedog]

Theres 2 things I see as possible problems:

1) The 9004 bulb may or may not fit the existing projector.
2) You'll have to drill a larger hole in the bottom to fit the larger wires through (probably 3/4" diameter)
.
.
.
3) Personal preference, but the 4.5" buckets are too small for the Stryker.

Otherwise, everything you need is there.

 

[Frag]

Theres 2 things I see as possible problems:

1) The 9004 bulb may or may not fit the existing projector.
2) You'll have to drill a larger hole in the bottom to fit the larger wires through (probably 3/4" diameter)
.
.
.
3) Personal preference, but the 4.5" buckets are too small for the Stryker.

Otherwise, everything you need is there.

Thanks for the quick answer Natedog! Just for comparison, what size is your bucket?

 

[Natedog]

Its 6" wide x 9" long

 

[SmokenJoe]

What size headlite you looking for. I have two for sale in classifieds.