[kraaazymike]

*EDIT: Since having the gas cap and using the bike for a a few hundred miles, it has developed a venting issue in the gas tank. See the thread here: http://www.yamahastarstryker.com/index.php/topic,7757.msg76331.html#msg76331 . To fix the problem, I had to remove the setup and revert to the OEM gas cap. Since reverting, the gas leak has gone away. You may have better luck, but by proceeding the same may happen to you.

This is a screw on Roland Sands cap. It actually doesn't lock anymore as a result, but for now that's something I'm okay living with. So far with 53 miles all highway at 80+mph, there doesn't seem to be any venting issues. So far so good!

Wider View

 

[11Stryker]

Re: Carlock Gas Cap Mod

lookin Good Kraazy!

 

[stroguy]

Re: Carlock Gas Cap Mod

Ew boy, ew boy a black cap that is functional and adaptable. Hooray. Would love some pics of the threads and the lower half of the construction.

Also if you go to the Gear Drive web site they have a video with one hot leather wearing hitch hiking momma.

 

[middleagecrisis]

Re: Carlock Gas Cap Mod

Where did you order the RSD gas cap?

 

[kraaazymike]

Re: Carlock Gas Cap Mod

Ew boy, ew boy a black cap that is functional and adaptable. Hooray. Would love some pics of the threads and the lower half of the construction.

Also if you go to the Gear Drive web site they have a video with one hot leather wearing hitch hiking momma.

Here's a pic of the adapter.

 

[kraaazymike]

Re: Carlock Gas Cap Mod

lookin Good Kraazy!

Thanks!

Where did you order the RSD gas cap?

I got the gas cap from Dennis Kirk. The adapter is from Tejas Motorsports.

 

[Minibob]

Re: Carlock Gas Cap Mod

Looks cool....kinda reminds me of a outdoor water faucet handle....maybe it's just the smart ass part of me.. I do like it though.

 

[Chop Chop]

Re: Carlock Gas Cap Mod

Do you have a part # or exact name of the adapter. I took a look and couldn't find it. Also is that the Low and Mean gas cap accent?

 

[kraaazymike]

Re: Carlock Gas Cap Mod

Do you have a part # or exact name of the adapter. I took a look and couldn't find it. Also is that the Low and Mean gas cap accent?

You'll have to call Tejas Motorsports. Speak to Tim over in parts for the adapter. 281.843.8591. I don't have the PN off the top of my head.

And yes, its the LM gas cap accent.

 

[wlfpak65]

Re: Carlock Gas Cap Mod

Ew boy, ew boy a black cap that is functional and adaptable. Hooray. Would love some pics of the threads and the lower half of the construction.

Also if you go to the Gear Drive web site they have a video with one hot leather wearing hitch hiking momma.

You cant say these things and not post up a link bruh..... Help a bruh out lol

 

[wlfpak65]

Re: Carlock Gas Cap Mod

Your tank looks clean as **** MIKE!!! Keep it up bruh!

 

[stroguy]

Re: Carlock Gas Cap Mod

Ew boy, ew boy a black cap that is functional and adaptable. Hooray. Would love some pics of the threads and the lower half of the construction.

Also if you go to the Gear Drive web site they have a video with one hot leather wearing hitch hiking momma.

You cant say these things and not post up a link bruh..... Help a
bruh out lol

http://www.rolandsands.com/products/gear-drive-gas-cap-black-ops

Only for you.

 

[wlfpak65]

Re: Carlock Gas Cap Mod

Ew boy, ew boy a black cap that is functional and adaptable. Hooray. Would love some pics of the threads and the lower half of the construction.

Also if you go to the Gear Drive web site they have a video with one hot leather wearing hitch hiking momma.

You cant say these things and not post up a link bruh..... Help a
bruh out lol

1:18 & 2:07..... Ohh Yahh!!! The Fripples!!!

http://www.rolandsands.com/products/gear-drive-gas-cap-black-ops

Only for you.

 

[ICEBOX]

Re: Carlock Gas Cap Mod

8) NICE MOD

 

[Carlock33]

Re: Carlock Gas Cap Mod

looks good! So Did you find the Marine JB Weld? I bet your install went a little easier than mine because it was about 2 in the morning when I put the epoxy on that insert and installed it in the tank but I wanted to get it done because I knew it had to cure overnight and then I found out the hard way the next morning that the Low and Mean octagon gas tank accent dose not fit over the insert! I forgot to mention that to you but it looks like you remembered.

 

[kraaazymike]

Re: Carlock Gas Cap Mod

Oh man! That must have been a pain! Ya I think my install took maybe 15 minutes. The hardest part was getting the old adhesive off from the chrome ring that was on there.

 

[stroguy]

Re: Carlock Gas Cap Mod

Do you have a part # or exact name of the adapter. I took a look and couldn't find it. Also is that the Low and Mean gas cap accent?

You'll have to call Tejas Motorsports. Speak to Tim over in parts for the adapter. 281.843.8591. I don't have the PN off the top of my head.

And yes, its the LM gas cap accent.

Thanks for the info Mike. I just called Tim for the adapter and I think I will stick with the original plan of powder coating my current cap. That adapter is higher than giraffe ass.

 

[Aelway7]

Re: Carlock Gas Cap Mod

Do you have a part # or exact name of the adapter. I took a look and couldn't find it. Also is that the Low and Mean gas cap accent?

You'll have to call Tejas Motorsports. Speak to Tim over in parts for the adapter. 281.843.8591. I don't have the PN off the top of my head.

And yes, its the LM gas cap accent.

Thanks for the info Mike. I just called Tim for the adapter and I think I will stick with the original plan of powder coating my current cap. That adapter is higher than giraffe ass.

I powder coated mine. I'll post a pic tomorrow

 

[stroguy]

Re: Carlock Gas Cap Mod

I powder coated mine. I'll post a pic tomorrow
[/quote]

That would be great. I love the cap Mike has but I can't justify in my head paying so much for that adapter. I have a bunch of guns I need to buy before the 6th.

Did your powder coater disassemble the cap before coloring it? Did they strip the chrome? My powderer says he would want to have the chrome stripped off the cap first as it probably just a pot metal chrome job. I trust his opinion as he has done several powder jobs for me and I have no complaints.

Thanks again and thanks to Mike for all of the information and pics.

 

[Aelway7]

Re: Carlock Gas Cap Mod

Here is mine. I disassembled it myself. pretty easy.