[rfveitch]

I got bored yesterday and started getting crazy with the hacksaw.
I cut my plastic fender up and made a side mount plate bracket.
I just have to figure out how to get some lights on it now.

I don't think it turned out too bad. Should hold me over until I buy the low and mean integrated taillight.

 

[K9Stryker]

LED tag bolts, they are like $19 and some change. That's a pretty nifty idea lol

 

[straightjacket]

Looks like you ran over your dog? Did you make your own pipes?

 

[klarowe]

Not too bad at all. The only concern I would have is that bracket being able to swivel from vibrations and getting tangled in the rear pulley. Could make for a very bad day. I would try to find a secondary way to attach it that will prevent it from rotating.

 

[warstryken16]

Looks like you could drill into the swingarm cover and throw an extra bolt through the bracket.
http://www.ebay.com/itm/2-x-White-L...Parts_Accessories&hash=item3f0ffcc7ff&vxp=mtr

 

[snowman68]

You may want to put something behind the tag to keep it from ripping about lost mine on my last bike

 

[rfveitch]

It seems pretty stable but I too am worried about the thing pivoting. I might just pick up a smallish piece of steel cut a slot in it, bend it on a 90 and weld it too the thing I made so it can be attached to the axle bolt.
The pipes are cobra dragsters so no I did not make them.

Thanks for the feedback guys.

Ps: the dog thinks she was helping. This is where she moved after laying on all my tools and bolts I had laying behind the bike.

 

[saclean]

looks a little risky to me. ???

 

[Mithros]

How's it handling in the wind?

 

[acepilot2007]

You could just put a 1/2" sheet metal screw in the end cover right above the nut holding the bracket on. That would be a lot easier than welding something on the side.