[immortal13]

Has anyone installed one? I'm pretty sure I've got it wired right but it not working properly. Left signal causes both left and right lights to flash. Right signal works properly. So I switched wires and got the reverse result.....wtf?

The instructions refer to a purple wire to the left signal(brown wire off bike), and the brown wire to the right signal(green off bike). Problem is there's no brown wire off this thing, only a black, blue, purple and ORANGE. I assume the orange should be the brown.???



Here's how I wired it:

Sig. Stabilizer/ Bike

Black- black(ground)
Blue- yellow (hot)
Orange- green(right)
Purple- brown(left)

Can anyone tell me what I'm doing wrong?

 

[bozzly]

Where did you get your stabilizer? (Nevermind the title states ChromeGlow) Mine came with Purple, Brown, Orange into Red & Black. Here is how it is connected and works perfectly. My positive connect wire came with the end so you knew it went to the battery. Contact Chris, something sounds strange with that especially since it doesnt have the correct wire colors.


Sig Stabilizer / Bike

Purple / Brown (Left Signal)
Brown / Green (Right Signal)
Black / Black (Ground)
Orange/Red / Positive Batter Terminal

 

[immortal13]

Thanks a million Boz. Detected the problem: I'm a colorblind bastard lol. Hooked it up right and works perfect. Got the led fork/led wrap lights installed with sig stabilizer....looks awesome! No more lollipop front turn lights.....now to get rid of the rears

I'm a fan of chrome glow. I'll be buying more of their stuff for sure.

 

[bozzly]

Glad I could help. I have noticed as I get older it is getting harder to differentiate certain colors. Did you use drugz circuits or dual element circuits with your wraps?

 

[ratboy]

Ok, so I appreciate this topic as this is going to be my next project. Do you need to attach a signal stabilizer to each of the left and right signals, or do you use one and wire it to both signals?

 

[bozzly]

The stabilizer has 4 wires, One goes to right turn signal, one to left turn signal, one to ground and one to positive battery terminal. Thats it. Easy breezy...

 

[immortal13]

Ok, so I appreciate this topic as this is going to be my next project. Do you need to attach a signal stabilizer to each of the left and right signals, or do you use one and wire it to both signals?

Nope...like bozzly said, just one unit with 4 wires. It was an easy install I'm just electrically retarded. I put mine under the seat, just strapped down the little box under the rubber strap that holds the tool pouch. Just wire into the bundle that goes to the REAR lights. Unit works for the whole bike.

Boz, no I did not. That's for if u want them to stay on as running lights, right? I only wanted them for turns. Super bright....very pleased with them.

 

[ratboy]

Thanks, Immortal13. So the whole-bike stabilizer doesn't affect the rear signals if they are still stock?

 

[bozzly]

Thanks, Immortal13. So the whole-bike stabilizer doesn't affect the rear signals if they are still stock?

No affect, wont hurt anything if you have rear bulbs.

 

[bozzly]

Ok, so I appreciate this topic as this is going to be my next project. Do you need to attach a signal stabilizer to each of the left and right signals, or do you use one and wire it to both signals?

Nope...like bozzly said, just one unit with 4 wires. It was an easy install I'm just electrically retarded. I put mine under the seat, just strapped down the little box under the rubber strap that holds the tool pouch. Just wire into the bundle that goes to the REAR lights. Unit works for the whole bike.

Boz, no I did not. That's for if u want them to stay on as running lights, right? I only wanted them for turns. Super bright....very pleased with them.

Yea, that is so you can have the lights as running along with the blinker. I do agree that these LED's are pretty bright...

 

[stryk-ed]

Would the Chromeglow signal stabilizer work with a rear led tail light? I ordered the Chromeglow LED flex wrap turn signals with the signal stabilizer and the positive drugz circuit but I also got the Kawasaki light that Clar mentioned (http://www.ebay.com/itm/LED-Turn-Ta...Parts_Accessories&vxp=mtr&hash=item43a6b9df8a). Am I going to need something else for the tailight or will the drugz circuit and the signal stabilizer work for both front and rear turn signals?

 

[clar2001]

Would the Chromeglow signal stabilizer work with a rear led tail light? I ordered the Chromeglow LED flex wrap turn signals with the signal stabilizer and the positive drugz circuit but I also got the Kawasaki light that Clar mentioned (http://www.ebay.com/itm/LED-Turn-Ta...Parts_Accessories&vxp=mtr&hash=item43a6b9df8a). Am I going to need something else for the tailight or will the drugz circuit and the signal stabilizer work for both front and rear turn signals?

I have not done my fronts but my understaning is you should be good only need one stabilizer in line.

 

[bozzly]

Would the Chromeglow signal stabilizer work with a rear led tail light? I ordered the Chromeglow LED flex wrap turn signals with the signal stabilizer and the positive drugz circuit but I also got the Kawasaki light that Clar mentioned (http://www.ebay.com/itm/LED-Turn-Ta...Parts_Accessories&vxp=mtr&hash=item43a6b9df8a). Am I going to need something else for the tailight or will the drugz circuit and the signal stabilizer work for both front and rear turn signals?

I have not done my fronts but my understaning is you should be good only need one stabilizer in line.

Yup, Clar is right. Only one stablilizer needed for the entire bike.

 

[stryk-ed]

Would the Chromeglow signal stabilizer work with a rear led tail light? I ordered the Chromeglow LED flex wrap turn signals with the signal stabilizer and the positive drugz circuit but I also got the Kawasaki light that Clar mentioned (http://www.ebay.com/itm/LED-Turn-Ta...Parts_Accessories&vxp=mtr&hash=item43a6b9df8a). Am I going to need something else for the tailight or will the drugz circuit and the signal stabilizer work for both front and rear turn signals?

I have not done my fronts but my understaning is you should be good only need one stabilizer in line.

Yup, Clar is right. Only one stablilizer needed for the entire bike.

Ok cool. Thanks

 

[Stryker Lunatic]

Where did you get your stabilizer? (Nevermind the title states ChromeGlow) Mine came with Purple, Brown, Orange into Red & Black. Here is how it is connected and works perfectly. My positive connect wire came with the end so you knew it went to the battery. Contact Chris, something sounds strange with that especially since it doesnt have the correct wire colors.

Sig Stabilizer / Bike

Purple / Brown (Left Signal)
Brown / Green (Right Signal)
Black / Black (Ground)
Orange/Red / Positive Batter Terminal

thanks for this post, man. i wish i'd come across it while i was researching installing this thing. i had it hooked up but it wasn't working and you'll never guess why... lol

 

[bozzly]

Glad you figured it out Michael. It's the funniest thing but if you don't wire it correctly, It just won't work as intended.

 

[immortal13]

Glad you figured it out Michael. It's the funniest thing but if you don't wire it correctly, It just won't work as intended.

Lol, funny how that works. I found that out to be true myself

 

[strykenshane]

figure this is the best place to ask, my fork wrap signals apeear to be on full intensity all the time and then dim when I turn the signal on, this is incorrect right?

 

[immortal13]

figure this is the best place to ask, my fork wrap signals apeear to be on full intensity all the time and then dim when I turn the signal on, this is incorrect right?

Dude, I'm not 100% sure but that doesn't seem right. I'm using mine as turns only but they are at full intensity when in use. I don't see why they would be dimming down on you. I would call chromeglow but maybe someone else on here can answer.

 

[strykenshane]

well I let the bike shop that did the paint work install them and they screwed up my buddies too so I'm pretty sure this moron screwed mine up too, They're ok but I was thinking they are supposed to run at about 50% intensity and then flash brighter