[HostileStryker]

My plan is to clean up everything in the back and integrate an LED tail light strip just below the lip of the fender. I started this today and it looks like an easy build. I made the lip to hold the LED strip and it looks like I can weld some tabs to the existing tail light mounts pretty easy after bending some strips and tacking them to the new lip for the LED strip.

Might take me a bit to put this together, but I will do my best to document how I do it. Right now I should come in under $100 for the assembly.

I have a picture of my old modded stock tail light as well.

More to come after I get the LED strip here for measurements, then tack and paint and onto install.

 

[HostileStryker]

Ordered a custom strip light from Radiantz yesterday, hoping to get everything done later next week and will report back with everything I did. Should end up dual element tail light/brake and amber blinkers wrapped in smoked tubing.

 

[depke]

Triple Whammy

Not directly related to this rebuild, but does has anyone installed the Kury triple whammy (run, turn, brake) on their Stryker? If so, did you need to install a load equalizer?

 

[SmokenJoe]

Not directly related to this rebuild, but does has anyone installed the Kury triple whammy (run, turn, brake) on their Stryker? If so, did you need to install a load equalizer?

I used the Triple W..... on my other bike and has nothing to do with LEDs. It just converts the stock turn signals into running and brake lights.

 

[HostileStryker]

Finished the tail light this weekend along with deleting a bunch of chrome and building some custom guards and license bracket. More pics to come.

 

[Craig]

Nice work.
Can you list parts, product number, and places to buy?

 

[HostileStryker]

Sure thing I will get it together and post it up.

 

[HostileStryker]

Parts list

The parts were from Radiantz

Item:1 - Qty:1, Custom Flexible LED array (3.6in) (4.2in) (3.6in) (Amber LEDs) (Smoke Tube), Price:$76.50
Item:2 - Qty:1, Dual Element Circuit for Z-Flex (65-100 LED 6121-00), Price:$4.99

Install is as easy as changing a battery.

The frame I made to stick them to was just some thin strap steel that I made custom bends in and welded some tabs to use the existing light mounts.

Total price, less than $100 :thumb: