Yamaha Star Stryker banner
1 - 16 of 16 Posts

·
Registered
Joined
·
213 Posts
Discussion Starter · #1 ·
Any body has a good DIY on rear removal and led tail light mod?
Step by step and what parts needed? If so please post
Thanks guys...
 

·
Registered
Joined
·
1,585 Posts
Theirs alot posted on the site i just did mine yesterday but just do a search for tail light mod and you will find it... I forgot where I red up on it theirs too many posts lol
 

·
Registered
Joined
·
213 Posts
Discussion Starter · #6 ·
Chrome glow has this new integrated light bar.will that one work?


Item No. Description Amount Qty.
ST393ARACPT 5.9 Inch $59.95
ST6126ARACPT 9.4 Inch $69.95
 

·
Registered
Joined
·
1,568 Posts
I also agree, but am having trouble finding that in the integrated Red and amber on the same strip. Do you see it?
 

·
Registered
Joined
·
317 Posts
I also just did this mod on my Stryker yesterday. Looks awesome and the LEDs on those strips seem to be reasonably bright, although I haven't been out on it yet. The original and detailed post as put up by The B in Bang, was a total help (Thanks B!), and as he shares, the only time consuming part is getting the right bends in your mount.... and make sure you buy the dual circuit part from Chrome Glow if you plan to have tail light + brake.
I'll get some pics up once I get my side mount plate installed by tuesday if I get time.
 

·
Registered
Joined
·
2,114 Posts
if you want it to have dual functions. for example Turn signals and running lights, or brake light and turn signals, or running and break.

What it does it give partial power for the one you want less visable and full power for the one you want to be brighter.
For example: you would want the running light to be dim and the break light to be brighter.
 
1 - 16 of 16 Posts
Top