[Mentat Ix]

Guy at work recommended this company - they have some risers that look like they might work. http://www.kewlmetalstore.com/product_info.php?cPath=27_86&products_id=643

Anybody seen these before? Or know if they'll work on a Stryker? I'm thinking not, because the ends of our bars are flared out a bit where they bolt to the triples. Something to think about, anyway.

 

[straightjacket]

If you are interested in these I can get you accurate measurments of the stud used to hold the bars on. My stock bars are off right now and are easy to get to.

 

[SmokenJoe]

Guy at work recommended this company - they have some risers that look like they might work. http://www.kewlmetalstore.com/product_info.php?cPath=27_86&products_id=643

Anybody seen these before? Or know if they'll work on a Stryker? I'm thinking not, because the ends of our bars are flared out a bit where they bolt to the triples. Something to think about, anyway.

The studs on our bars are the same depth as the top triple. Actually longer, because they have the acorn nut screwed on the bottom of them. Those risers are for bars that are held on with bolts from the bottom.