Yamaha Star Stryker banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
My gauge cluster went blank. Started with No turn indicator But turn signals worked. Then Cluster Went blank and only the hi beam indicator worked in .the cluster. No odometer reading. Nothing. Any ideas thanks in advance.
Battery is 7-8 years old. Bike is completely stock.
 

·
Registered
‘13 Stryker
Joined
·
815 Posts
If you haven't downloaded the service manual , search for it and do that. I'd start by checking the Backup fuse which is for odometer and clock. take seat off and there is a rubber flap that may be covering the little fuse box I can't remember exactly. But it is the second fuse they are marked on the back of the fuse lid. If that is good, I would remove the battery, and have it checked or use service manual to do the check yourself if you are able.

123312
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
All fuses have been switched. New battery installed. Everything works perfectly lights, horn, fan, turn signals, headlights, brake lights and even the plate light. Engine runs strong and without hiccups.
Just has no power to the gauge cluster 8(
 
1 - 4 of 4 Posts
Top