Yamaha Star Stryker banner
1 - 4 of 4 Posts

· Registered
Joined
·
59 Posts
Discussion Starter · #1 ·
Just thought I would share with everyone that Gman Industries now has the Bully FI Controller for the Stryker and Raider.

I used one on my previous bike, Suzuki C109, and it worked great. It smoothed out surges right out of the box, and each time I added pipes and Air Box, I just had to push a couple buttons and it was ready to go.

You can even tinker with your fuel settings as you ride. I never used that feature because my bike ran great.

Here's the link.
https://www.gmanindustries.com/shop/pc/viewPrd.asp?idproduct=824&idcategory=29

Gman gets it out fast and has very good customer service.

I'll post install pics when I get it done.

Bill
Phoenix, AZ

(I am not affiliated with Gman or get anything out of it, just a satisfied customer)
 

· Registered
Joined
·
59 Posts
Discussion Starter · #4 ·
I used one on my 2008 Suzuki C109 and it worked great. I traded that bike in on my 2011 Stryker because I didn't really need a huge, cross country bike. And I fell in love with my Stryker :^)

I fully expect it to work just fine.
I added Cobra pipes, pushed a couple buttons and it was set. Later I added a high flow exhaust and again, pushed a couple buttons, ran great.

The gas tank on the C109 was easy to remove (although very large) and had a detachable gas line with a valve in it so you didn't have to empty the tank.

From what I've read here, there is more involved with the Stryker gas tank, so I probably won't do it for a while. It's down right now while I'm waiting for a Forward Control Extension part from Scootermods, they sent the wrong part. And I am removing the mudflap, and installing LED lights on the license plate which I raised higher, until that part arrives Fri or Sat. Hope to ride this weekend.

Bill
Phoenix, AZ
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top