Yamaha Star Stryker banner
1 - 7 of 7 Posts

· Registered
Joined
·
2,531 Posts
Discussion Starter · #1 ·
I have been searching for the spikes for the top and bottom of the forks and the bottom of the frame and can't seem to make a confirmed decision. Hate wasting $ if not needed.
Also need sizes for all spikes also.
 

· Registered
Joined
·
35 Posts
15/16 for the top and 33mm for the bottom forks, i just looked up trucker supply sites to find them (they're just lug nut covers) Generally run $1 for each, shipping is what sucks but if you have a trucker supply place nearby you'll save a ton!
 

· Registered
Joined
·
2,531 Posts
Discussion Starter · #5 ·

· Registered
Joined
·
2,531 Posts
Discussion Starter · #6 ·
Got a reply back. Will call them in the morning.
Dear Joe,

Thank you for contacting Iowa80.com

We want to make sure you get exactly what you want, so please call our toll free number to discuss shipping via the post office. We ship based on weight and zip and would be glad to work with you on the shipping.

Check out our hot deals while you are on our website http://www.iowa80.com. If you have any questions, please feel free to call us at 866.446.9280

Thank you.

Deanna Slack
Iowa80.com
 

· Registered
Joined
·
2,531 Posts
Discussion Starter · #7 ·
Took a ride to truck stop and no go there for any of our needs.
Call the number above at Iowa80.com and said that they could do all the stuff I want for a lower rate of about $5.20. Should fit in one of those pre sized boxes for certain dollar amounts. Spikes are on the way.
They can't do it on the Internet but has to be done by phone. Pays to ask.

2.....33mm Chrome Plastic Spike Nut Cover - Push On
Item Number: 195800

4.....15/16" Chrome Plastic Spike Nut Cover - Push On
Item Number: 162129

2......33mm Chrome Plastic Super Spike Nut Cover - Thread
Item Number: 180872
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top