Yamaha Star Stryker banner
1 - 4 of 4 Posts

· Registered
Joined
·
700 Posts
Discussion Starter · #1 ·
I have attached a photo taken from the left (kick stand) side of the bike. We did not receive install instructions for the PCS lowering link. I want to know if I have put these on correctly. My neighbor and I think it's correct.
 

Attachments

· Registered
Joined
·
700 Posts
Discussion Starter · #2 ·
If I read #4 of dliszews DIY thread, I would have gotten my answer :D
He wrote: "the longer detent faces the front of the bike. I found it easier to put the bolt in at the bottom first and then do the top"
 

· Registered
Joined
·
700 Posts
Discussion Starter · #4 ·
skwerlee said:
no you have it installed backwards. the longer of the two slots should be facing forward.
Correct ... in dliszew's DIY thread he said the longer detent faces the front, which is opposite of how I first had them (in the picture)
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top