Yamaha Star Stryker banner


1332 Views 7 Replies 4 Participants Last post by  immortal13
I'm installing my v&h big radius and where the pipes meet the exhaust port, there is kind of a gap between the bracket and the head. Not sure if its supposed to be like that or not. I'm guessing it is because the flange nuts are fairly shallow and wouldn't be able to go all the way down the bolt. Anyone have the v&h pipes that can help me out? Here's the pic of what it looks like. Install is almost done....just don't want to go any farther if this isn't right.


See less See more
1 - 2 of 8 Posts
Looks right to me. It's not supposed to be flush against the exhaust port, it's just supposed to hold the pipe against the gasket. If it does that, you're good to go...
The factory nuts should be fine and dandy as long as they're not bottomed out against the caps...
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.