How tall are ya buddy, I'm 6'1" and I've heard some of the mustangs put ya a little too far forward, ya got the bike looking great, how did ya get the lights into the intake?
I am 5'6" it's a mustang seat and if it puts me forward its not much i would say just because the padding is thicker so maybe a 1/2 to 1" best guess
Installing lights on the intake is easy, I got my lights from autozone or you could get them from advanced auto parts i used the red lights they only look orange when you install which i thought was cool you need the ones that are 6" in a pack of 2 what you should do first is with cover off wipe the inside of the cover with alcohol in the valley between the 2 front bolt holes.
Now put the front screen in now take 1 of the led's (DO NOT REMOVE THE TAPE YET) and shape it to the air cleaner so that wires exit by the bolt holes. The other end of this should line up with the center of the air cleaner. If you look to the left of the bolt hole you will notice that you can fish your wires through their when your happy with the placement of the led remove the tape and apply. Repeat the process for the other light. Now what i did is ran my bottom wire on the inside of the cover 3/4 the way around then splice and solder these wires to the top led wires then run the wires to the back top of the air cleaner. install air filter and then mount it up, your wire should becoming out the back and on top. At this point just run your wires to a power source i already had lights under my tank to i just tapped into them. REMEMBER! your bike will have to be worked on so maybe connect these lights with spade connectors for easy removal or use posi taps these are reusable