Yamaha Star Stryker banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hey guys !
I am installing the 17" quick release windshield on my stryker and don't understand where the bottom mount goes for the brackets. Is it the one beside the headlight or the signal light? I can't seemd to fit it properly in either one. Any help is appreciated.
regards
David
 

·
Registered
Joined
·
28 Posts
the mounts will line up with the bolts that need to be removed with allen keys and use the bolts supplied with the mounts...you can't really go wrong...
 

·
Registered
Joined
·
6 Posts
dscheyen said:
That is what I thought but the bottom brackets do not sit right on the rake
The go where the bolts are for the head lamp. I ended up going back to my dealer and it took them about an hour to figure it out. The instructions are not clear.
 

·
Registered
Joined
·
18 Posts
The bracket mounts to the same bolt hole as the headlight, the windshield bracket goes on top of the light bracket. Use the longer bolts that came with the windshield. Keep all bolts loose until they have all started the thread then no problem. I did the mounting on mine at it works perfect. :D
 
1 - 5 of 5 Posts
Top