sorry to hear that Shane...learning exp. Glad your safe. I would definately jump back on and revisit the site, so that you don't develop a "mental thing" about it.
Just laid her down for the 1st time!!!!
So, here in Kansas we are having awesome riding weather. I rode to Cheney Lake on this beautiful Friday, and I guess I got caught up in the sight seeing. I stopped, left signal, notice sand on the ground, proceeded slowly, and BAM, my rear tire got out from under me on the right, I thought I corrected, but next thing I know I was airborne (only for a few miniseconds) and my baby was eating gravel and dirt.
BLUF (Army talk: Bottom Line Up Front), at only 359 miles, I have a dent in my gas tank on the right side, couple of Kruger scratches on my pipes, and I had to ride home with my right rear/side view pointing to the ground. Disappointed because I didn't get my 400 miles today. Trying to get that 600 service before the true winter weather hits the Flatlands.
The dent in the gas tank looks like someone threw a junk of road at it and the metal's showing, but thank God, no puncture. Any advise and suggestions of the most economical way to repair it. I have no tools or experience in body/paint work.
Tanks in advance!!!
BLUF (Army talk: Bottom Line Up Front), at only 359 miles, I have a dent in my gas tank on the right side, couple of Kruger scratches on my pipes, and I had to ride home with my right rear/side view pointing to the ground. Disappointed because I didn't get my 400 miles today. Trying to get that 600 service before the true winter weather hits the Flatlands.
The dent in the gas tank looks like someone threw a junk of road at it and the metal's showing, but thank God, no puncture. Any advise and suggestions of the most economical way to repair it. I have no tools or experience in body/paint work.
Tanks in advance!!!
21 - 35 of 35 Posts
@FormerFuzz: 10-4, I did my own 10-47 investigation minus the dispatch, case number, and cop jokes...lol We're the best at razz each other.
@SFCMcGan: What's funny, but my deductible, is I took her to the shop and they recommended that I change out the tank and the pipes - mod it. Don't know if I can get the replacement without the undercoat stickers on it, but will definitely ask. Now is the time to start looking at new pipes... I'm thing the Vance and Hines Twin Staggered in Black, and ensure that I don't let the scenery get my mind (and eyes) off of the ground (eventhough there ain't no discharge on it...lol)
UPDATE!!! I went back there today, took pix of my skid and dump, then punched that curb in the face TWICE!!! So, now I know (or at least think I know) how to negotiate a left and right turn on uneven and multiple gravel surfaces over concrete... Thanks Guys!
@SFCMcGan: What's funny, but my deductible, is I took her to the shop and they recommended that I change out the tank and the pipes - mod it. Don't know if I can get the replacement without the undercoat stickers on it, but will definitely ask. Now is the time to start looking at new pipes... I'm thing the Vance and Hines Twin Staggered in Black, and ensure that I don't let the scenery get my mind (and eyes) off of the ground (eventhough there ain't no discharge on it...lol)
UPDATE!!! I went back there today, took pix of my skid and dump, then punched that curb in the face TWICE!!! So, now I know (or at least think I know) how to negotiate a left and right turn on uneven and multiple gravel surfaces over concrete... Thanks Guys!
Thanks for the idea, I think I'm gonna put that in the memory bank and use it once the Stryker is a lil' older, if needed. I just don't feel competent and comfortable enough to disengage the tank, even after reading and viewing the threads. Thanks again for the pix.Toby said:Now would be a good time to remove the decals from the tank if you want. If you are familiar with painting and can't afford a paint job you can get rattle cans with good enough tips to do a good job. And or practice a bit on metal surfaces first. Drain the gas remove the tank and go for it. Bondo is cheep. When we bough the old Virago it had a dent in the side and was pretty beat up. So I rattle caned it and the wife hand painted a metallic gold Pegasus on both sides. Then I clear coated it with a rattle can. Here is some before and afters.souljaboi6 said:Another angle...
When I started riding in 1965...yes people had motorcyles back then...I spent a lot of time on the ground....it is a learning process...going to revisit the site is a good idea but before you go try to figure out what went wrong the first time i.e. - too much throttle - too much lean....you were making a left turn from the stop but dropped the bike on the right side...normally in that situation the bike should have spun out to the right, having you drop the bike on the left side unless you grabbed the front brake causing you to go as you said airbourne plus it would have caused you to drop the bike on the right side......ok I wasn't there and am probably totally wrong.................plus I've had way toooooooo much tequilla....I'm glad the damage was minimal and you didn't hurt anything but your pride.
Just so we have an understanding for June - you and the missus can drink tequila - I want NO part of that ;DROADKILL said:.................plus I've had way toooooooo much tequilla....I'm glad the damage was minimal and you didn't hurt anything but your pride.
Oh great DREADED ONE thou not hijackest the thread about June.....Ok if you didn't I will....West Central Raider Rally in Leads SD June 8-10....Western Area Raider Rally - June 15 - 17 Reno NV........All Strykers are welcome to join us at either or both...Toby I hope to see you around Lake Tahoe for the WARR rally...dreadly said:Just so we have an understanding for June - you and the missus can drink tequila - I want NO part of that ;DROADKILL said:.................plus I've had way toooooooo much tequilla....I'm glad the damage was minimal and you didn't hurt anything but your pride.
....and of course the South East Raider Rally in Maggie Valley NC Aug 1-5
IRISH CREAM LIQUOR BRANY er BRANDY eggnog and a little coffee here. ah what was we talkin bout ? Oh ya bikes are parked. I hate that word Fn PARKED. bU T YA Reno it is 16 eth the 17th is my wife's birthday And mine 25th. Happy new year every one.ROADKILL said:Oh great DREADED ONE thou not hijackest the thread about June.....Ok if you didn't I will....West Central Raider Rally in Leads SD June 8-10....Western Area Raider Rally - June 15 - 17 Reno NV........All Strykers are welcome to join us at either or both...Toby I hope to see you around Lake Tahoe for the WARR rally...dreadly said:Just so we have an understanding for June - you and the missus can drink tequila - I want NO part of that ;DROADKILL said:.................plus I've had way toooooooo much tequilla....I'm glad the damage was minimal and you didn't hurt anything but your pride.
souljaboi6, I am sure you have already thought of it. It came to me a minute ago, to make sure your tires are not over inflated making them hard.
I just the V&H twin slash staggard on my Raven... best purchase so far!! AND they are true 2 into 2 pipes... gives it a rumble at idle... then lets everyone know when you crank on the throttle! you will like them!souljaboi6 said:@FormerFuzz: 10-4, I did my own 10-47 investigation minus the dispatch, case number, and cop jokes...lol We're the best at razz each other.
@SFCMcGan: What's funny, but my deductible, is I took her to the shop and they recommended that I change out the tank and the pipes - mod it. Don't know if I can get the replacement without the undercoat stickers on it, but will definitely ask. Now is the time to start looking at new pipes... I'm thing the Vance and Hines Twin Staggered in Black, and ensure that I don't let the scenery get my mind (and eyes) off of the ground (eventhough there ain't no discharge on it...lol)
UPDATE!!! I went back there today, took pix of my skid and dump, then punched that curb in the face TWICE!!! So, now I know (or at least think I know) how to negotiate a left and right turn on uneven and multiple gravel surfaces over concrete... Thanks Guys!
Glad to know, because I haven't found a true sound bite on youtube. Thanks.SFCMcGan said:I just the V&H twin slash staggard on my Raven... best purchase so far!! AND they are true 2 into 2 pipes... gives it a rumble at idle... then lets everyone know when you crank on the throttle! you will like them!souljaboi6 said:@FormerFuzz: 10-4, I did my own 10-47 investigation minus the dispatch, case number, and cop jokes...lol We're the best at razz each other.
@SFCMcGan: What's funny, but my deductible, is I took her to the shop and they recommended that I change out the tank and the pipes - mod it. Don't know if I can get the replacement without the undercoat stickers on it, but will definitely ask. Now is the time to start looking at new pipes... I'm thing the Vance and Hines Twin Staggered in Black, and ensure that I don't let the scenery get my mind (and eyes) off of the ground (eventhough there ain't no discharge on it...lol)
UPDATE!!! I went back there today, took pix of my skid and dump, then punched that curb in the face TWICE!!! So, now I know (or at least think I know) how to negotiate a left and right turn on uneven and multiple gravel surfaces over concrete... Thanks Guys!
Have a Happy, Safe, and Blessed New Year everyone!
Later today I'll try and get a good sound clip of my bike... I am having trouble posting pics...souljaboi6 said:Glad to know, because I haven't found a true sound bite on youtube. Thanks.SFCMcGan said:I just the V&H twin slash staggard on my Raven... best purchase so far!! AND they are true 2 into 2 pipes... gives it a rumble at idle... then lets everyone know when you crank on the throttle! you will like them!souljaboi6 said:@FormerFuzz: 10-4, I did my own 10-47 investigation minus the dispatch, case number, and cop jokes...lol We're the best at razz each other.
@SFCMcGan: What's funny, but my deductible, is I took her to the shop and they recommended that I change out the tank and the pipes - mod it. Don't know if I can get the replacement without the undercoat stickers on it, but will definitely ask. Now is the time to start looking at new pipes... I'm thing the Vance and Hines Twin Staggered in Black, and ensure that I don't let the scenery get my mind (and eyes) off of the ground (eventhough there ain't no discharge on it...lol)
UPDATE!!! I went back there today, took pix of my skid and dump, then punched that curb in the face TWICE!!! So, now I know (or at least think I know) how to negotiate a left and right turn on uneven and multiple gravel surfaces over concrete... Thanks Guys!
Have a Happy, Safe, and Blessed New Year everyone!
You will love the pipes. Just got them on my bike the other week. Havent got to ride it yet (live in MN) but I start it up all the time and love how they look.SFCMcGan said:Later today I'll try and get a good sound clip of my bike... I am having trouble posting pics...souljaboi6 said:Glad to know, because I haven't found a true sound bite on youtube. Thanks.SFCMcGan said:I just the V&H twin slash staggard on my Raven... best purchase so far!! AND they are true 2 into 2 pipes... gives it a rumble at idle... then lets everyone know when you crank on the throttle! you will like them!souljaboi6 said:@FormerFuzz: 10-4, I did my own 10-47 investigation minus the dispatch, case number, and cop jokes...lol We're the best at razz each other.
@SFCMcGan: What's funny, but my deductible, is I took her to the shop and they recommended that I change out the tank and the pipes - mod it. Don't know if I can get the replacement without the undercoat stickers on it, but will definitely ask. Now is the time to start looking at new pipes... I'm thing the Vance and Hines Twin Staggered in Black, and ensure that I don't let the scenery get my mind (and eyes) off of the ground (eventhough there ain't no discharge on it...lol)
UPDATE!!! I went back there today, took pix of my skid and dump, then punched that curb in the face TWICE!!! So, now I know (or at least think I know) how to negotiate a left and right turn on uneven and multiple gravel surfaces over concrete... Thanks Guys!
Have a Happy, Safe, and Blessed New Year everyone!
It's raining pretty much all the time here in washington... I go out to the shop and start it up for a few minutes just hear it... the Twin Slash sound awesome!
Just got the estimate today, Flo and her crew have a pretty fast and easy process... I'm still waiting to see the damage on my insurance bill though. But, I ordered the V&H Twin Stags in Black and some new mustache bars to replace my 1st pair. The right one was pretty soft after the lay down; can't trust it if I slipped again. I'm expecting to get a few miles on her before I have to put her in the shop when the parts get in. Currently at around 450 and trying to make it up to 600 to get that service at the same time as the tank, pipes, and bars... Kansas is having a CA winter (SO FAR)
Ride Safe!
Ride Safe!
Oh, and one more question: Think I should ask the shop for the tank, pipes, and engine guards that they replace???
21 - 35 of 35 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Yamaha Star Stryker
A forum community dedicated to Yamaha Star Stryker Motorcycle owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, reviews, and more!
Full Forum Listing
Recommended Communities
