Joined
·
5 Posts
what is the best way to wire in led lights?
led lights
1 - 11 of 11 Posts
Joined
·
306 Posts
need more scope as to what you mean.
like the path under the seat or chassis?? or the tie into the battery along with the cut off?
like the path under the seat or chassis?? or the tie into the battery along with the cut off?
Joined
·
5 Posts
chassis mount
Joined
·
1 Posts
I'd probably do it if I didn't think it would be a waste. I rarely ride in the dark. I might put the RAW power pucs on the wheels though because that's just plain cool.
______________________________
LED Fluorescent
led ceiling lights
led strip
______________________________
LED Fluorescent
led ceiling lights
led strip
Just finished mine this weekend:
https://www.dropbox.com/s/xnyefd1snycpe7l/Video Oct 16, 12 38 43 AM.mov
and in total dark
https://www.dropbox.com/s/34vci06sp89hoed/Video Oct 16, 12 37 52 AM.mov
For ground effects I have 4 strips (2 on each side) on the frame pointing inward (not on the ground so that a bike jack won't crush them)
For the wheels I have one pod on the inside of the swingarm on the exhaust side, on the front wheel it is mounted above the top bolt on the inside of the fender, on the leaning side.
For the engine I have one on the back of the engine mounted to the plastic wall, one strip underneath the gas tank pointed down, one pod at the front of the tank hidden inside it pointed to the frame, one pod near the foot controls.. and all of that repeated on the opposite side.
And then lastly one pod above the radiator, and one on the floor of the inside of the low and mean radiator cover.
https://www.dropbox.com/s/xnyefd1snycpe7l/Video Oct 16, 12 38 43 AM.mov
and in total dark
https://www.dropbox.com/s/34vci06sp89hoed/Video Oct 16, 12 37 52 AM.mov
For ground effects I have 4 strips (2 on each side) on the frame pointing inward (not on the ground so that a bike jack won't crush them)
For the wheels I have one pod on the inside of the swingarm on the exhaust side, on the front wheel it is mounted above the top bolt on the inside of the fender, on the leaning side.
For the engine I have one on the back of the engine mounted to the plastic wall, one strip underneath the gas tank pointed down, one pod at the front of the tank hidden inside it pointed to the frame, one pod near the foot controls.. and all of that repeated on the opposite side.
And then lastly one pod above the radiator, and one on the floor of the inside of the low and mean radiator cover.
Looks good! I like how they change color.gravitas said:
This is what I did... The ones under the bike don't look that bright...lol...
http://www.yamahastarstryker.com/index.php/topic,1218.0.html
1 - 11 of 11 Posts
