[female_stryker2012]

Can anyone recommend a good Horizontal Side Mount License Plate Relocation Kit. I would like to go with the
Kuryakyn Curved Horizontal Side Mount License Plate Frame - Black - Requires a Mounting Clamp

however, not sure that this will fit my bike. Can anyone out there shed some light on this topic? From everything I see, there is no mounting clamp for the Stryker that fits this. Thank you for your input in advance.

 

[SmokenJoe]

Welcome. There are lots of post regarding side mount plates. Here is a place that may have what you want.
http://store.road6customs.com/License-Plate-Brackets_c15.htm

 

[kraaazymike]

Welcome. There are lots of post regarding side mount plates. Here is a place that may have what you want.
http://store.road6customs.com/License-Plate-Brackets_c15.htm

+1. It's what I used to run. Thick durable steel, you'll never have to worry about it. Good product and great price.

 

[deputystryker]

I had mine made by a Stryker forum member (straightjacket), I asked mine to be adjustable from vertical to horizontal because of the law's regarding vertical mounted plates. If you check either my garage pictures or deputystryker Stryker build I should have pictures posted of it.

If his product interest you I would recommend contacting him through this forum to see if he's still or will build you one. Also other forum members on here have his side mount plate product.

 

[K9Stryker]

I made mine

 

[SmokenJoe]

I had mine made by a Stryker forum member (straightjacket), I asked mine to be adjustable from vertical to horizontal because of the law's regarding vertical mounted plates. If you check either my garage pictures or deputystryker Stryker build I should have pictures posted of it.

If his product interest you I would recommend contacting him through this forum to see if he's still or will build you one. Also other forum members on here have his side mount plate product.

I forgot, he made mine too. Old age sucks. Contact him to see if he's still making them.

 

[Stryker Lunatic]

I made mine

me too! :thumb: :rockon::whoo:

 

[sdw75]

Does anyone know the size of the mounting hole?

 

[SmokenJoe]

axle diameter is 0.785" so use a 1" hole.

 

[cambridge]

Welcome. There are lots of post regarding side mount plates. Here is a place that may have what you want.
http://store.road6customs.com/License-Plate-Brackets_c15.htm

Same here. Great Product, strong as He11 and best price anywhere. :thumb:

 

[sdw75]

Thank you SmokenJoe.

 

[mikoloe]

Originally Posted by SmokenJoe
Welcome. There are lots of post regarding side mount plates. Here is a place that may have what you want.
http://store.road6customs.com/Licens...ackets_c15.htm

What I like about these side mounts is that little extra plate. you can pull your old license plate light off and mount it to the extra plate instead of having to buy new LED's. Just extend your wires from where you cut them under your Fender and re run all the way to your Plate. Easy as that !
Right Joe?

 

[SmokenJoe]

Originally Posted by SmokenJoe
Welcome. There are lots of post regarding side mount plates. Here is a place that may have what you want.
http://store.road6customs.com/Licens...ackets_c15.htm

What I like about these side mounts is that little extra plate. you can pull your old license plate light off and mount it to the extra plate instead of having to buy new LED's. Just extend your wires from where you cut them under your Fender and re run all the way to your Plate. Easy as that !
Right Joe?

Yep, I didn't do mine that way but a great idea.

 

[Skwerlee]

i love my Road6Customs plate mount

 

[Chop Chop]

Straightjacket has a great post on the vendor board with pics

 

[toby]

Straightjacket made mine also. He made it with a slot instead of a hole so it slips on. Makes it easier.:nod:

 

[CoastieRider]

Did you all pay a little over $20 for shipping at Road 6 Customs?

 

[CntryUSMC]

I just ordered mine and I did the postal one for 5.80

 

[CoastieRider]

I just ordered mine and I did the postal one for 5.80

Great, thanks. For some reason I didn't see that option available. Just ordered one, thanks everyone!