[ares x]

I am looking to find out who is using the Integrated LED Taillight and the Turn Signal Eliminator Kit and what you think of them. I have the BlasterX Integrated Taillight and Kuryakyn Sub Fender on my Raider. This got rid of the lollipops and that huge, silly looking piece of plastic holding the license plate. I'm assuming that these two items will accomplish the same thing on my wife's Stryker. She's been griping forever about that huge piece of plastic and loving how clean mine looks.

Can anyone tell me if these are what I'm looking for and how they like the products?

Thanks!

 

[ares x]

Nobody has bought these products for their Stryker?

 

[DraEagWol]

looks like an intersting site... lots of products. But can't say as i know of anyone on this site that has used them directly - some of the same products ppl have used, but have purchased elsewhere.

http://www.customdynamics.com/yamaha_stryker_accessories.htm

may have to check them out... if you do get something from them, let us know how the process went for you. That and always shop around for better deals on the same item... ya nvr know how much dough ya can save$$$

 

[Skwerlee]

Nobody has bought these products for their Stryker?

This is what a lot of us are running and we love them!

http://www.customled.com/products/integrators/Stryker_tail_light/stryker_tail_light.htm

Here's a thread that shows you how to get rid of the duck bill nad flush mount that light for a clean custom look.

http://www.yamahastarstryker.com/20-how-tos/3218-how-flush-brake-light-fender.html

Here are the front LED fork wraps a lot of us use.

http://chromeglow.com/catalog.asp?prodid=740354&showprevnext=1

I replaced the factory flasher relay with the ELFR-1 relay one to keep the stock flash rate.

http://www.customled.com/products/flasher_relay/flasher_relay.htm#LayoutRegion1LYR

 

[Adrenaline Revolution]

This, or the blaster set-up is on my list of things to get.
I'm waiting for Straightjacket to get back to me about the vertical license plate holder before I spend the money on the integrated light.
I'm being patient!!!:nod:

 

[ares x]

This is what a lot of us are running and we love them!

http://www.customled.com/products/integrators/Stryker_tail_light/stryker_tail_light.htm

Here's a thread that shows you how to get rid of the duck bill nad flush mount that light for a clean custom look.

http://www.yamahastarstryker.com/20-how-tos/3218-how-flush-brake-light-fender.html

Here are the front LED fork wraps a lot of us use.

http://chromeglow.com/catalog.asp?prodid=740354&showprevnext=1

I replaced the factory flasher relay with the ELFR-1 relay one to keep the stock flash rate.

http://www.customled.com/products/flasher_relay/flasher_relay.htm#LayoutRegion1LYR

This is exactly what I needed. I wasn't aware that Custom LED had a Stryker version. That's what I have on my Raider and love it. I'm really suprised there's not some sort of Sub Fender duckbill elimination for the Stryker yet. It cleaned up the back end so nicely and provided a place for the license plate.

Thanks for the info.

 

[Skwerlee]

This is exactly what I needed. I wasn't aware that Custom LED had a Stryker version. That's what I have on my Raider and love it. I'm really suprised there's not some sort of Sub Fender duckbill elimination for the Stryker yet. It cleaned up the back end so nicely and provided a place for the license plate.

Thanks for the info.

You're welcome. The only "duckbill eliminator kit" I'm aware of for our bikes would be the Low and Mean LED brake light kit. You simply unbolt the duckbill and bolt their bracket into place. It looks really trick but many aren't a fan of this setup becuase the LED strip wraps around to the side of the fender so you can't see the blinker feature much at all from the rear.

without license plate bracket
http://www.lowandmean.com/index.php...tegory_id=105&option=com_virtuemart&Itemid=60

with license plate bracket
http://www.lowandmean.com/index.php...tegory_id=105&option=com_virtuemart&Itemid=60

I'm running the Custom LED setup with a Road 6 Customs side plate.

http://store.road6customs.com/Curved-Radius-Side-Mount-License-Plate-Bracket-Mount-00112.htm

 

[11Stryker]

Here's my Duckbill removal:

 

[ares x]

You're welcome. The only "duckbill eliminator kit" I'm aware of for our bikes would be the Low and Mean LED brake light kit. You simply unbolt the duckbill and bolt their bracket into place. It looks really trick but many aren't a fan of this setup becuase the LED strip wraps around to the side of the fender so you can't see the blinker feature much at all from the rear.

without license plate bracket
http://www.lowandmean.com/index.php...tegory_id=105&option=com_virtuemart&Itemid=60

with license plate bracket
http://www.lowandmean.com/index.php...tegory_id=105&option=com_virtuemart&Itemid=60

I'm running the Custom LED setup with a Road 6 Customs side plate.

http://store.road6customs.com/Curved-Radius-Side-Mount-License-Plate-Bracket-Mount-00112.htm

The L&M brake light with license plate is pretty cool, but the price sure isn't. I can see why some would have issues about the turn signals though.

 

[ares x]

Here's my Duckbill removal:

So you just moved everything up onto the fender, right?

 

[Blackvapor]

I'm running the Custom LED setup with a Road 6 Customs side plate.

http://store.road6customs.com/Curved-Radius-Side-Mount-License-Plate-Bracket-Mount-00112.htm

What size mounting hole did you get on your side plate?

And have you ever noticed your plate drooping and need readjusting or tightening because of vibration?

 

[strykergirl]

Was going to ask the same question about the mounting hole...where is the plate mounted?

 

[Skwerlee]

What size mounting hole did you get on your side plate?

And have you ever noticed your plate drooping and need readjusting or tightening because of vibration?

The axle diameter is 0.785" so you'll want to select the 3/4" option. And no the mount is held securely in place with the 110 foot pounds of torque you place on the axle nut...doesn't budge at all.

Here's mine

 

[11Stryker]

So you just moved everything up onto the fender, right?

Yes, modified a led Sparto light with Run/Turn Signals. And installed a Kuryakin curved license plate bracket.

 

[ares x]

I am really loving that L&M set up and they do address the signal issue with the additional license plate LEDS bringing the grand total to over $300 not counting tax (which I would pay since they're in Sedona) and shipping.

Now I just need to figure out how much my wife would like it without telling her about it. That'll be fun.