Yamaha Star Stryker banner
1 - 12 of 12 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter · #1 ·
M22-042-001 Stock exhaust Stock air filter

This is the 1st Available Map for the Power Commander V ;D
 

Attachments

·
Registered
Joined
·
1,004 Posts
Re: M22-042-001 Stock exhaust Stock air filter

It's a good start!
[move]Woo-Hoo! Woo-Hoo! Woo-Hoo! Woo-Hoo! Woo-Hoo! [/move]
 

·
Registered
Joined
·
23 Posts
Re: M22-042-001 Stock exhaust Stock air filter

Keep em coming if you can. I want to upgrade to this system but there's no maps available yet
 

·
Registered
Joined
·
362 Posts
Re: M22-042-001 Stock exhaust Stock air filter

Thanks Kov! ;D I'll see what I can upload when I get mine tuned in. I've been busy as **** with everything but riding!
 

·
Registered
Joined
·
152 Posts
Re: M22-042-001 Stock exhaust Stock air filter

If you change the stock pipes to anything open and still use a stock air cleaner, use this map. It was made by Andrew Quinones at Power Commander after I raised **** because their website only has stock maps. It works great for mine and all I did was remove my cat and mufflers right behind the o2 sensor and replace it with a Magnaflow glass pack.....Looks and sounds awesome!
 

Attachments

·
Registered
Joined
·
734 Posts
Re: M22-042-001 Stock exhaust Stock air filter

Jeremyf073 said:
remove my cat and mufflers right behind the o2 sensor and replace it with a Magnaflow glass pack.....Looks and sounds awesome!
A little off topic, but any chance you could post a picture?
 

·
Registered
Joined
·
152 Posts
Re: M22-042-001 Stock exhaust Stock air filter

Sure. When I get to the house today I will snap a pic and post it
 

·
Registered
Joined
·
152 Posts
Re: M22-042-001 Stock exhaust Stock air filter

Here is the pic of my $56 exhaust system. I removed everything at the clamp just after the O2 sensor and welded on a MagnaFlow class pack (part number 18124). Then I removed one of the chrome tips from the stock exhaust, tack welded it on the end of the glass pack, and shot it all with some high-temp flat black and its good to go. It really sounds awesome. Very low, deep, and loud. Add the custom program from Power Commander I listed above and roll on. Without the program, the bike runs way to lean and pops like gunfire during the decel so dont do it if your not rocking the Power Commander.
I got the idea from a video of a guy on youtube who did the same thing to his Stryker. Check it out to hear how it sounds.
 

Attachments

·
Registered
Joined
·
56 Posts
Discussion Starter · #9 ·
Re: M22-042-001 Stock exhaust Stock air filter

Jeremyf073 said:
If you change the stock pipes to anything open and still use a stock air cleaner, use this map. It was made by Andrew Quinones at Power Commander after I raised **** because their website only has stock maps. It works great for mine and all I did was remove my cat and mufflers right behind the o2 sensor and replace it with a Magnaflow glass pack.....Looks and sounds awesome!
Thanks..I'll try this map out this weekend ;D
 

·
Registered
Joined
·
226 Posts
Re: M22-042-001 Stock exhaust Stock air filter

Hey thanks for the map...worked out great with my install today...finished up doing the vh big radius..but still running stock air until next week...then to the dyno for a precise tune...bike ran great with this map.
 

·
Registered
Joined
·
152 Posts
Re: M22-042-001 Stock exhaust Stock air filter

Cool. Glad you like it. If you find it still pops too much during decel, change the fuel maps on both cylinders in the column listed as "zero" from the number 15 to 17 from 2000 rpm to 7000 rpm and only in column zero. Thats the advice of Andrew at PC.
 

·
Registered
Joined
·
1,004 Posts
Re: M22-042-001 Stock exhaust Stock air filter

There's no way I can get to Vegas so I emailed their tech support to see if they'd reimburse me if I got a custom map made at my local authorised tune center. I'm awaiting a reply.
 
1 - 12 of 12 Posts
Top