Anyone w/a tachometer on their semi stock Stryker Q: have you figured out approx. what speed in each gear is a few hundred RPM's below the redline (presuming flat level road & someone under 190lbs.) it would be nice to have an approx. MPH to keep from hitting rev-limiter. Thanks in advance.
MPH = RPM
1 - 4 of 4 Posts
Joined
·
407 Posts
Great question! I hope you get some replies because I too would like to know 
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2
I rarely hit 2500rpm except for initial acceleration from a stop.. I like to push hard from a stop....
I can tell you 4th gear at 50MPH is right around 16-1800rpm...
5th gear is running right around 1600rpm at 65mph... 1800rpm is 75mph 2200rpm is roughly 90mph...
I hit 110mph but did not look down to see rpm...
I can tell you 4th gear at 50MPH is right around 16-1800rpm...
5th gear is running right around 1600rpm at 65mph... 1800rpm is 75mph 2200rpm is roughly 90mph...
I hit 110mph but did not look down to see rpm...
1 - 4 of 4 Posts
