[fearthisinc]

Ok.. So I have been reading different posts and can't seem to find a straight answer.. I currently have stock pipes on the bike and drilled holes in the baffles to get them a little louder.. I have been looking into doing an air intake mod and in some posts it says you can do either new exhaust or new intake without needing to worry about installing a tuner, but then other posts say if you do a new intake you have to get the tuner.. Just trying to get some solid info on the matter.. Don't want to do any damage to the bike.. Thanks

 

[jmwinf146]

Yes! You will need a tuner.

Sent from my Nexus 4

 

[mikoloe]

Ok.. So I have been reading different posts and can't seem to find a straight answer.. I currently have stock pipes on the bike and drilled holes in the baffles to get them a little louder.. I have been looking into doing an air intake mod and in some posts it says you can do either new exhaust or new intake without needing to worry about installing a tuner, but then other posts say if you do a new intake you have to get the tuner.. Just trying to get some solid info on the matter.. Don't want to do any damage to the bike.. Thanks

GEt you a cobra or EKJ. thats it!

 

[snowman68]

If you're pipes were unmolested then no but as they are the safe bet is to add tuner, you won't be disappointed. Well maybe you will, I ripped up a new Metz back tire in only 2600 miles because it was so much fun hitting the throttle a little harder than normal

 

[Adrenaline Revolution]

You may not "Need" one but if you knew what you were missing you'd definitely WANT one!!:thumb: :nod:

 

[Hotsocket]

With a BAK and stock pipes (drilled or not) it will run okay - but it will run hot due to running lean. The excess heat will shorten oil life and engine life. It's okay to run that way for a while but you will want a tuner at some point. You will be surprised how much cooler it runs when properly enriched.