Yamaha Star Stryker banner
1 - 20 of 148 Posts

·
Registered
Joined
·
298 Posts
Discussion Starter · #1 ·
Hey guys we have had a few request for this item, so we put this item together and we would love to get some feedback. What your looking at is a direct bolt-on replacement for the Stock rear fender brake/turn and license plate holder. The Low and Mean LED light will all light up while running and then flash brighter for brake and turn signals. Brake is in the center of the fender turn are along the sides. This kit will also come with a license plate light and chrome cover. Here's a few pictures compared to stock. Retail price will be $265 Includes Aluminum polished bracket, LED light with dual elements, White LED for plate and License plate cover. Wiring to you stock harness will be necessary. This product will only work with the stock fender (uncut) and will also work while lowered with a 250 installed. We will do a special short time pre-order price for the first ten at $200. This item will not be in the group buy. Please contact us at [email protected] if you are interested.
Let us know what you think.


 

·
Registered
Joined
·
306 Posts
+1 ^

i'm actually putting on my license plate on the side.. and would love to just "clean up the rear light" with your set up there without the plate mount.
 

·
Registered
Joined
·
298 Posts
Discussion Starter · #6 ·
StrykenShane said:
Would it be possible to get this without the plate mount for those of us that already have side mount plates?
Sure you could just not attach the plate. There will still be a bracket just for the top two bolts for the plate. You could cover this with more LED's. We can also offer this without the bracket if you request. The price would still be the same. Please email us if your interested. We will start production on Monday. But the special will end after the first 10 orders.
LM
 

·
Registered
Joined
·
306 Posts
Sweet!
I'll be your first order tomorrow for the special request.
 

·
Registered
Joined
·
221 Posts
Believe it or not, I still have the stock mount and just noticed last week that THE PLATE IS CRACKING AWAY! I guess the centrifugal force of the wind everyday and the fact it's only bolted on by 2 lousy screws on the top which is forcing the bottom to bend upwards at high speeds is causing this dilemma! Trying to figure out a way of fixing this but got sooo many other issues concerning my house because of recent hurricane to worry about!

I know it's going to fly off any day now... :mad:
 

·
Registered
Joined
·
4,199 Posts
The_Joker said:
I like the clean look, but wonder if it will provide enough light to be seen......
I have seen one of these up close and from a distance and you'd be shocked how much light they put out.
 

·
Registered
Joined
·
298 Posts
Discussion Starter · #15 ·
spellcast1 said:
Liken' the idea - not liken' the red stripe look ! is there an option so it isn't so noticable ?
We will offer the LED in Clear, Smoked and Red. We will be starting production next week. By the following week we will ship the first 10 orders. Thank you for your interest. Video coming soon that will show you all the details.
LM
 

·
Registered
Joined
·
881 Posts
I need to see the clear/smoke...Not feeling that red at all........ Ill wait for the video to see the light output too, but I also kind of like having a bigger tailight,
 

·
Registered
Joined
·
32 Posts
Blekaxe said:
Umm not to be dumb but where are the blinkers with this setup?
They should be integrated into the light bar. the entire bar is a running light, and when you hit the switch, only half the bar blinks brighter
 

·
Registered
Joined
·
298 Posts
Discussion Starter · #20 ·
strykeraf said:
Blekaxe said:
Umm not to be dumb but where are the blinkers with this setup?
They should be integrated into the light bar. the entire bar is a running light, and when you hit the switch, only half the bar blinks brighter
That's right the whole light will be lit when the bike is running, the center will become brighter when you touch the brakes and the sides will flash when you use the turn signals. We are working on a video to show these features and the other light options. The red light is good for photos. We only have a few more orders till the special discount is over. The video will not be ready for another week, if your interested now is the time.
Email us all your info and preference to [email protected]
LM
 
1 - 20 of 148 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top