[bigboi18184]

New mods with pics

Just ordered my rear fender rack and parts unlimited solo low rider seat. Also ordered my air intake yesterday, got the SS Custom Cycle Chopper series with the black Iron Cross cover.

Two things I'm looking to get ordered today are my grips and a set of mirrors.

Aren't our grips just like the V-Stars and just plain 1" grips? Or do we need a special type of grip for these bikes, haven't taken mine off yet to look.

Looking at these or the Avon ones with spikes.

http://www.jpcycles.com/product/ZZ50187

 

[K9Stryker]

The Avon ones with the spikes won't fit.

 

[K9Stryker]

The Avon ones with the spikes won't fit.

The notches for the cables are wrong, ya might wanna look at the kury iso grips and get the spike ends.

 

[bigboi18184]

10-4 just ordered the ones in my link

Think that's about enough parts for this month lol, so far have on order an Air Intake, Kuryakn Grips, parts unlimited solo low rider, rear fender rack (black) and still need some new gloves and a jacket.

 

[Aelway7]

My Avon grips came with 2 different notch sets. I matched up the one that was the same as ours and glued it on.

 

[wayne]

The Avon ones with the spikes won't fit.

I just put a set on mine, no problem. You do have to get the set for Metric cruisers, not Harley. They come with two throttle inserts, just read the directions, pick the right insert and glue it on. They look great.

 

[11Stryker]

Parts Unlimited Low Seat

Your going to like that seat. Just put one on mine yesterday.

 

[bigboi18184]

I've been debating getting it since late last year. Finally bit the bullet and ordered the mods I've been wanting all winter. Got the rear fender rack to plug the bolt holes too. Hope it is all delivered in the next week or two. Only thing I didn't order was a set of mirrors.

 

[bigboi18184]

Well noticed today my belt had a small fray on it and so I tried adjusting the belt wnd couldn't seem to get it. Ended up pillimg my side mount plate off and tryimg to adjust it since the plate kept moving when I tightened axle.

So pulled license plate and mounted to rear foot pegs and took the bile to dealer to adjust belt....qtd $35 and should have it back in the am. Said the small fray shouldnt cause any problems it was very small.

So far rear rack is the only part to come in, headlight and black fender stay should be in today and air intake and grips in monday.....then seat sometime in the next 2 weeks.


EDIT:

Fender stays, headlight, grips and light bracket all came in today. Air intake will be in Monday and seat will be in Thursday.

 

[wayne]

Well noticed today my belt had a small fray on it and so I tried adjusting the belt wnd couldn't seem to get it. Ended up pillimg my side mount plate off and tryimg to adjust it since the plate kept moving when I tightened axle.

So pulled license plate and mounted to rear foot pegs and took the bile to dealer to adjust belt....qtd $35 and should have it back in the am. Said the small fray shouldnt cause any problems it was very small.

So far rear rack is the only part to come in, headlight and black fender stay should be in today and air intake and grips in monday.....then seat sometime in the next 2 weeks.


EDIT:

Fender stays, headlight, grips and light bracket all came in today. Air intake will be in Monday and seat will be in Thursday.

Of course we will need pics!

 

[bigboi18184]

Yep will be coming next weekend along with thoughts on seat. Heres the rack before it came off and the bkke went in to the dealer.

 

[bigboi18184]

Can't win for losing, I cross threaded the **** nut and they had to cut it off. Now I need a new bolt and nut, 275$ installed. Was going to do it myself but I don't wamt to screw amything elsenip...

 

[bigboi18184]

LOVE this Air Intake, it seems to be really heavy duty from the feel of it. Looks like the adapter is made of aluminum there is a cardboard gasket that goes with it and the iron cross, black plate are aluminum the mesh if just some cheap metal mesh but looks good too.

 

[onebadstryker]

I'm digging that air intake as well. Where did you get it?

Sent from My awesome GS3 using Tapatalk 2

 

[bigboi18184]

I'm digging that air intake as well. Where did you get it?

Sent from My awesome GS3 using Tapatalk 2

SS Custom Cycles, they have about 10-15 different intakes for the stryker, the air intakes come with the adapter unlike others and this one was only $190 shipped

 

[onebadstryker]

Nice.:thumbup:

Sent from My awesome GS3 using Tapatalk 2

 

[nogard]

11Stryker - the solo seat looks so nice on our bike. Wife would be upset if i took off her seat however :9.

 

[reaper]

The rack looks great against the red paint. I wish I could go solo on the seat but even though my wife rides her own, she still likes to crawl on the back of mine sometimes.

 

[bigboi18184]

The rack looks great against the red paint. I wish I could go solo on the seat but even though my wife rides her own, she still likes to crawl on the back of mine sometimes.

Thx, getting bike out of the shop tomorrow and will be installing all my parts Saturday.

Will put up some new pics when i get it mostly done, kind of worried about the headlight don't know if i can cut off all the excess wires or if i should put them under the tank like a lot of other people.

 

[bigboi18184]

Got it out of the shop today from getting a new axle and nut then having the belt adjusted, now i got the creaking sound from belt when I'm rolling slow but they said its normal with a correct adjustment so I'm sticking with it.


Have got everything installed but the headlight and new passenger foot peg plate mount.

New rear fender rack, parts unlimited solo seat with flame stitching, black fender stays, kurykan grips, SS custom cycles air intake. Installed every last piece of this in around an hour.

Thx, usmarinedelta for the fender stays and the headlight.

A question I have on the headlight is how do we get our headlight off. I see the two bolts that hold the bracket on but the bolts holding the headlight to the bracket don't have any edges they are smooth.