[sdsting]

Got a small rock chip on the tank and would like to get some touch up paint.
I have the ’12 Copper (photo below)
Here’s an image (attached) from the ColorRite sight after I entered in my model bike.
I can’t tell which is the correct code #, no mention of Copper..
Anybody know exactly what I’m looking for?
Thanks.

 

[WOLFStryke]

Looks like you need the second one & Both numbers apply for top & base coat. For touch up probably just go with top coat number, I would think

 

[BuckeyeStryker]

My Stryker is the same color as well and I was interested in this at one point and found a link to a touch up pen sold on Amazon. From the looks of it, there is only a top coat and clear coat. I have no idea how well this will match up so use it at your own risk. It might help though.

http://www.amazon.com/Yamaha-Stryker-Motorcycle-Touch-Up-Paint/dp/B00BDGAVCC/ref=sr_1_1?ie=UTF8&qid=1365793886&sr=8-1&keywords=reddish+copper+touch+up+pen+yamaha+stryker

 

[kraaazymike]

You'll need dull yellowish cocktail 4: Both base and color coat. I know because in the 2011 there's a comment for reddish copper ;-)

 

[sdsting]

Mike you are correct, good catch! If you look at the paint code selections for the ’11 Stryker (below) it is completely different than the ’12 Stryker paint code I attached in my 1st post. Particularly for the Copper description. Thanks Mike!
PS: you garage remote mod is still my favorite mod I’ve done, that and 11’s pulley wheel change. Hat’s off again to both of you!