Yamaha Star Stryker banner
1 - 6 of 6 Posts

· Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
I have a small problem with my stock passenger foot pegs, my passenger doesnt have enough leg room and feels cramped up after about 45 minsutes of riding. I want some extensions, I found some 4 inch extensions for the passenger foot pegs but I have after market exhaust so they wont work. any ideas for extensions for the passenger pegs?
 

· Registered
Joined
·
121 Posts
Passenger footpeg Relocators for the Roadstar Warrior will work on the Stryker,With the stock exhaust you will need to cut off the heel gaurd because it hits on the exhaust bracket. The stock foot pegs will work on the relocators but will not stay in the up position. Will have to get after market pegs or floor board for the Warrior and you will be set. Brings them down and forward.
 

· Registered
Joined
·
4,672 Posts
Cycle-listic also has spacers that extend them further. I had them shipped with the pegs encase I wanted to put them on the 950 which has a much fatter pipe.
 

· Registered
Joined
·
354 Posts
I ended up with an extra pair of Kury Swing Wings (thanks to the girl who hit my bike, and some great insurance coverage), going to install these as quick release passenger pegs in order to give that extra 3 inches of leg room.
 

· Registered
Joined
·
1,382 Posts
Stryker3117 said:
Had same problem, I got a set of exstensions from CYCLE-ISTIC there is a thread already on here about them. Just put them on but I think they will be fine
This may not be an issue, but with the CYCLE-ISTIC i've noticed that my legs hit them quite often when getting off the bike, or power walking the bike. Just letting you know, it occasionally catches me off guard.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top