Yamaha Star Stryker banner

Problems with new grips

1224 Views 3 Replies 3 Participants Last post by  Jeremyf073
Hey gang. I bought some new AVON grips and the clutch side went on without a problem but the throttle side is giving me ****.
It appears that the diameter of the grip is a little bigger than the stock so when its all back together it is so stiff that it will not retract or "roll off the throttle" like it should....My first thought is to "waller out" (thats an official Texas term) the housing that the grip sits in because that is what is pinching the grip and not allowing it to move freely but before I do that......I wanted to check with my peeps on here to see if anyone else has had this issue and how they resolved it....So come on and share your knowledge.
1 - 1 of 4 Posts
Good to know... These are the same grips that I have waiting to be installed.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.