Yamaha Star Stryker banner

1 - 15 of 15 Posts

·
Registered
Joined
·
101 Posts
Discussion Starter · #1 ·
Does anyone know if they make an offset bracket move the passenger pegs down lower so knees are not so high up for passenger?
 

·
Registered
Joined
·
2,531 Posts
grtguy657 said:
they said they should work fine if distance between mout ing hole width is 20mm , $79.00 more or less
They are not the best looking solution but they can removed very quickly. One 1/4 " pin and cotter key.
 

·
Moderator
Joined
·
8,693 Posts
For anyone that has passenger floorboards, I have a set of offset brackets from Star that will put them about 3" lower and more forward than Stock. Free to the first person that wants them!
 

·
Moderator
Joined
·
8,693 Posts
Will work only for passenger floorboards. will not work with pegs.
 

·
Moderator
Joined
·
8,693 Posts
At the moment wildfan gets them unless deal doesnt go thru.
 

·
Registered
Joined
·
4,661 Posts
Cycle-istiC Peg extensions worked perfect on my Stryker. Ordered the spacers and bolts for the V Star exhaust pipe side Total just under $100 so I can attach them to the V Star if we want to go two up on that one. The spacers are to put them out over and down around the pipe. not necessary on the Stryker.
 
1 - 15 of 15 Posts
Top