[shadowchillagin]

Well, after waaaay too long... It is complete! For now.. As moding never ends!! I still have a few tweaks to do here and there like re-do the wiring for the tail light by shorting the harness underneath so its better, pull the speedo cover and side covers off and black them out. As well as get the Demon Cycle Head Light and black that case out as well but for now...It's complete!!

Mods done this round...
New Joker Machine Smooth Bar end Mirrors w/ insert for bars, New Avon Grips modded to accept the bar end mounts, New Fork Mount LED wrap blinkers, New Side Mount license plate with light for tag light mounted on inside of fender aiming at plate(New Custom Vertical Plate ordered as well with "Syke" as the lettering ), PCS Lowering Kit set on 1" Setting, Removed Both Upper and Lower Belt guards, New AvonAV72 240 Tire!!:thumb: and the main attraction. Yamaha R1 LED Tail light fabbed into Custom bobbed stock fender with a lot of man hours into the body work portion of it to get the lines just right by a great friend of mine who did an amazing job!! I also removed all the stickers!!
I also have the 30tooth front pulley on order to add to the madness! It should be here in the next week or so!

Here are some pics!! Enjoy!
:cool2:

 

[Bonzman17]

Looks good

 

[DeRail98]

Looking good. Good work on the rear fender.

 

[threedprof]

How's the visibility with those mirrors?

 

[shadowchillagin]

How's the visibility with those mirrors?

It's not "too" bad actually... You have to bend that arm/wrist in a bit to see but otherwise its not completely terrible.. takes some adjusting that is for sure though!

 

[mcphersonpilot]

Where did you get the side plate mount from?

 

[strykenshane]

Dig it

 

[kraaazymike]

I'm diggin that brake light and how it mounts to the fender. Awesome job! Are you lowered at all? If you can pull the fender closer to the wheel it would really add to the look.

 

[shadowchillagin]

Where did you get the side plate mount from?

Ebay

I didn't mount the light like they have it because I wanted to hid the wires as much as possible so I mounted the light on the inside if the fender facing downward at the plate. I'll post a few close ups of the fender when I get a chance .. There are A LOT of hours into that fender! lol

http://www.ebay.com/itm/YAMAHA-STRY...Parts_Accessories&hash=item3a803b2ac9&vxp=mtr

I'm diggin that brake light and how it mounts to the fender. Awesome job! Are you lowered at all? If you can pull the fender closer to the wheel it would really add to the look.

The brake light isn't really mounted "to" the fender... It's frenched right INTO the fender.. :rockon:
I'm on the 1" setting of the PCS Lowering kit. Any lower and I think I wouldn't have the clearance riding two because of the added distance from the light being frenched into the fender.
I may find a freind who is..bigger sit on the bike with me once and see just how much clearance I am left with to see how it would sit though.. Haven't done that yet though.