[K9Stryker]

Making a few threads to try get people to post pics of individual mods to make it easier for people to find the most common and easy mods.

For the front and rear turn signals and brake lights.

 

[kraaazymike]

Ok, I'll bite. Front turn signals are from Chrome Glow. They are the LED fork wraps with the running light circuits.
http://www.chromeglow.com/catalog.asp?prodid=740354&showprevnext=1

Integrated Brake light/turn signals are from Custom LED.
http://www.customled.com/products/integrators/Stryker_tail_light/stryker_tail_light.htm

Don't mind the little hole that leaks light above my left brake light. It was a bad choice in prior experimentation with mods. Also, I added music to this because I felt listening to me walking around and the turn signal clicking was lame.

This setup doesn't require any additional resistors or any load equilizers (which is just an expensive resistor). Just follow this guide: http://www.yamahastarstryker.com/index.php/topic,2358.0.html

 

[klarowe]

2012 Stryker
Rear brake light (03-05 R6 Smoked Sequential Integrated tail light):

Front LED Strip turn signals. Not quite as bright as I'd like for daytime driving, but a ton cheaper than the chrome glows (will eventually get the chrome glows though). Also my my blacked out headlight surround.

 

[Skwerlee]

Ok, I'll bite. Front turn signals are from Chrome Glow. They are the LED fork wraps with the running light circuits.
http://www.chromeglow.com/catalog.asp?prodid=740354&showprevnext=1





Don't mind the little hole that leaks light above my left brake light. It was a bad choice in prior experimentation with mods. Also, I added music to this because I felt listening to me walking around and the turn signal clicking was lame.

This setup doesn't require any additional resistors or any load equilizers (which is just an expensive resistor). Just follow this guide: [url=http://www.yamahastarstryker.com/index.php/topic,2358.0.html]http://www.yamahastarstryker.com/index.php/topic,2358.0.html[/url]
[/quote]

I'm gonna run the same front's but I'm not gonna use them as running lights. I'll just have em wired up to blink on when i hit the indicator switch and then stay off the rest of the time.

 

[kraaazymike]

I'm gonna run the same front's but I'm not gonna use them as running lights. I'll just have em wired up to blink on when i hit the indicator switch and then stay off the rest of the time.

Do it! And you'll save $21.99 while youre at it!

 

[schimbo stryker]

Custom Turn signals and Low and mean brake light

 

[elle]

Custom Turn signals and Low and mean brake light



[img]

[img]
[/quote]

Are your rear signals on the end of the swingarm?

 

[schimbo stryker]

Yes

 

[J4patrice]

Low and Mean taillight mod and Radiantz license plate.

 

[fujums]

eBay specials


Sent from my iPad using Tapatalk HD

 

[11Stryker]

 

[SmokenJoe]

Integrated brake/turn/running light from e-bay for a R1

added jeep button mini turns to fill holes left by removing lollipops.

chromeglow turns set up as running and turns

 

[Skwerlee]

this is my flush mounted Custom LED integrated taillight setup

 

[spiznizel]

low and mean rear kit

 

[BOOLSHOT]

Here are my rear blinkers. Ordered them from Ebay, they were under $10 shipped.. fit in stock holes..

 

[sci85]

Low and Mean taillight mod and Radiantz license plate.

[/quote]

J4patrice, am I seeing that your setup has the white plate light? Was that part of the L&M kit or ? Is that little strip of light visible in daylight?

Thanks,
Sci85

 

[J4patrice]

Low and Mean taillight mod and Radiantz license plate.

[/quote]

J4patrice, am I seeing that your setup has the white plate light? Was that part of the L&M kit or ? Is that little strip of light visible in daylight?

Thanks,
Sci85
[/quote]
Yes, it is coming from the Radiantz license plate. Here is a link.
[url=http://www.bikerhiway.com/radiantz-real-flex-integratorz-1-plate-frame-p-1993.html?utm_campaign=frgl&utm_medium=frgl&utm_source=froogle&gclid=CJyqi5HA0a8CFcHJKgodIDcIHw]http://www.bikerhiway.com/radiantz-real-flex-integratorz-1-plate-frame-p-1993.html?utm_campaign=frgl&utm_medium=frgl&utm_source=froogle&gclid=CJyqi5HA0a8CFcHJKgodIDcIHw[/url]

 

[sci85]

Very cool. Thanks j4patrice!

 

[elle]

Yes

I need those. What did you get? I want to make my taillight brake and run only and have the blinkers moved. Brake light and blinkers on my bike really aren't enough right now.

 

[schimbo stryker]

Got them from AAC. aacstyle.com

heres the ones i got.

http://www.automotivelightstore.com/oracleledpod-1-1.aspx