Yamaha Star Stryker banner
1 - 20 of 128 Posts

· Banned
Joined
·
1,430 Posts
Discussion Starter · #1 · (Edited)
Sinz Side Mount License Plate Holder:
1/8" steel, laser cut.
Slotted axle hole for easy installation.
Angled tag holder covers the pulley.

Black powder coating- $60.00
Shipping included

True Chrome powder coating- $65.00
Shipping included

Add $5 for a LED light pod.

DESIGN CHANGES AFTER FIRST BATCH RUN:
The tag hole size has been increased and spacing adjusted (Spacing is based on Alabama, see below for your state).
The axle hole and slot size has been increased to a 3/4" diameter.

All orders filled after 8-12-2013 will have these changes.

Anyone who wants to send me back the old one and have it modified with these changes, please do.






6 Shooter Side Mount License Plate Holder:
1/8" steel, laser cut.
Slotted axle hole for easy installation.
Angled tag holder covers the pulley.

Black powder coating- $65.00
Shipping included

True Chrome powder coating- $70.00
Shipping included

Add $5 for a LED light pod.




ALABAMA
7"
4"
9/32"
6.0"
2-3/4"
ALASKA
7"
4"
1/4"
5-1/4"
3.0"
ARIZONA
7"
4"
1/4"
5-3/4"
2-7/8"
ARKANSAS
7"
4"
1/4"
5-3/4"
2-3/4"
CALIFORNIA
7"
4"
1/4"
5-3/4"
2-3/4"
COLORADO
7"
4"
1/4"
5-3/4"
2-3/4"
CONNECTICUT
7"
4"
11/32"
5-13/16"
2-27/32"
DELAWARE
7"
4"
1/4"
5-3/4"
2-3/4"
District of Columbia
7"
4"
1/4"
5-5/8
2-5/8"
FLORIDA
7"
4"
1/4"
5-3/4"
2-3/4"
GEORGIA
7"
4"
1/4"
5-3/4"
2-3/4"
HAWAII
7"
4"
1/4"
5-3/4"
2-3/4"
IDAHO
7"
4"
1/4"
5-7/8"
2-3/4"
ILLINOIS
7"
4"
9/32" x 7/16"
5-3/4"
2-3/4"
INDIANA
7"
4"
1/4"
5-3/4"
2-3/4"
IOWA
7"
4"
1/4"
5-3/4"
2-3/4"
KANSAS
7"
4"
1/4"
5-3/4"
2-3/4"
KENTUCKY
7"
4"
1/4"
5-3/4"
2-3/4"
LOUISIANA
7"
4"
1/4"
5-3/4"
2-3/4"
MAINE
7"
4"
5/16"
5-3/4"
2-3/4"
MARYLAND
7"
4"
1/4"
5-3/4"
2-3/4"
MASSACHUSETTS
7"
4"
1/4"
5-3/4"
2-3/4"
MICHIGAN
7"
4"
5/16"
5-3/4"
2-3/4"
MINNESOTA
7-3/16"
4-3/16"
1/4"
6-1/8"
3-1/8"
MISSISSIPPI
7"
4"
1/4"
5-3/4"
2-3/4"
MISSOURI
7"
4"
1/4"
5-3/4"
2-3/4"
MONTANA
7"
4"
1/4"
5-3/4"
2-3/4"
NEBRASKA
7"
4"
1/4"
5-3/4"
2-3/4"
NEVADA
7"
4"
9/32"
5-3/4"
2-3/4"
NEW HAMPSHIRE
7"
4"
3/8" x 1/4"
5-3/4"
2-3/4"
NEW JERSEY
7"
4"
1/4"
5-3/4"
2-3/4"
NEW MEXICO
7"
4"
1/4"
5.0"
2-3/4"
NEW YORK
7"
4"
1/2" x 1/4"
5-3/4"
3.0"
NORTH CAROLINA
7"
4"
1/4"
5-3/4"
2-3/4"
NORTH DAKOTA
7"
4"
1/4"
5-3/4"
2-3/4"
OHIO
7"
4"
1/4"
5-3/4"
2-3/4"
OKLAHOMA
7"
4"
1/4"
5-3/4"
2-3/4"
OREGON
7"
4"
9/32"
5-3/4"
2-3/4"
PENNSYLVANIA
7"
4"
1/4"
5-3/4"
2-3/4"
RHODE ISLAND
7"
4"
1/4"
5-3/4"
2-3/4"
SOUTH CAROLINA
7"
4"
1/4"
5-3/4"
2-5/8"
SOUTH DAKOTA
7"
4"
1/4"
5-3/4"
2-3/4"
TENNESSEE
7"
4"
5/16"
5-7/8"
2-3/4"
TEXAS
7"
4"
9/32"
5-3/4"
2-3/4"
UTAH
7"
4"
1/4"
5-3/4"
2-3/4"
VERMONT
7"
4"
1/4"
5-3/4"
2-3/4"
VIRGINIA
7"
4"
5/16"
5-7/8"
2-7/8"
WASHINGTON
7"
4"
1/4"
5-3/4"
2-3/4"
WEST VIRGINIA
7"
4"
3/8"
5-3/4"
2-3/4"
WISCONSIN
7"
4"
5/16"
5-3/4"
2-3/4"
WYOMING
7"
4"
5/16"
5-3/4"
2-3/4"
 

· Registered
Joined
·
3,133 Posts
That's a great price and a nice looking product.
The one I made tends to shake a bit from the awesome torque of the mighty Stryker V Twin!!!
But seriously...

Do yours shake side to side much or are the pretty solid?
I may have to pony up for the chrome PC model.
Can you post a pic of the chrome set-up?

"AR"
 

· Banned
Joined
·
1,430 Posts
Discussion Starter · #3 ·
I have not installed one yet because every one that I had made was shipped and sold Monday, so none for me yet. I am hoping that someone that bought one can install and chime in (hope its all positive ha ha).

I was hoping the chrome powder would be in last night, but it will be today. I have one sold that will be in the chrome, so I will take some pics and post them up tonight.
 

· Registered
Joined
·
3,133 Posts
The one I made is very thin and shakes a lot. Not that I really care because I don't have to try to read it when I'm cruising but a cop might!

I'll be getting one of your chrome ones in the near future but all the mods I've done and paid for recently have left me broke!

Save me one!
Mine...
 

· Registered
Joined
·
6,785 Posts
I have not installed one yet because every one that I had made was shipped and sold Monday, so none for me yet. I am hoping that someone that bought one can install and chime in (hope its all positive ha ha).

I was hoping the chrome powder would be in last night, but it will be today. I have one sold that will be in the chrome, so I will take some pics and post them up tonight.
Are you able to make me one that swings in and out? Preferably vertical. Black
 

· Banned
Joined
·
1,430 Posts
Discussion Starter · #10 ·
Got my side mount plate in the mail today. Can't wait to get it installed! Just need to find some screws to mount the plate to the bracket...
I was in such a rush with getting these out to everyone, I forgot the slotted spacer and the screws. If anyone needs them please let me know and I will send them in an envelope. Otherwise a spacer (cut with a slot) and 4 m3x.5 screws will be needed. Please post up pics when you have it installed :)
 
G

·
I was in such a rush with getting these out to everyone, I forgot the slotted spacer and the screws. If anyone needs them please let me know and I will send them in an envelope. Otherwise a spacer (cut with a slot) and 4 m3x.5 screws will be needed. Please post up pics when you have it installed :)
If you could send those, it would be great... and save me a trip somewhere to find some....
 

· Registered
Joined
·
437 Posts
I was in such a rush with getting these out to everyone, I forgot the slotted spacer and the screws. If anyone needs them please let me know and I will send them in an envelope. Otherwise a spacer (cut with a slot) and 4 m3x.5 screws will be needed. Please post up pics when you have it installed :)
If you already have something made, I'd much prefer using what you have as opposed to trying to MacGuyver something together.
 

· Banned
Joined
·
1,430 Posts
Discussion Starter · #14 ·
I already have it made. They are cut from 1/8" steel as well. All the brackets are already tapped for a m3x.5 bolt, so just slide it through the tag holder and it will bolt to the bracket.

I will send everyone out a letter with the spacer and screws tomorrow. If you do not want to wait, you can go ahead and install and keep them for spares.

Spacer goes behind the bracket at the axle if needed to clear the end of the swingarm since the bracket is straight.
 
1 - 20 of 128 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top