L&M Spedo Face
I just installed a new spedo face from L&M removed crome cover , remove 3 mounting screws from back, 6 small screws from back of cluster, cover lifts off, with 2 fingers pulled spedo needle off (scary if I screw this up $$ to fix) pulled off fine with a little pressure, 2 small screws on face remove pull face off ,insert new and put 2 small screws back, reinstall spedo needle to the 0 possition learned that by trail and error , place face back on with screws remount place crome cover on and done about 25 min.
Down side spedo face had to be filled to fit properly, when inserting the 2 screws to hold it in place the Vinal wants to pull off.
I was very disapointed in the quality of this product, looks like just cheap vinal over plactic not sure how this will hold in the sun over time , if you look cloase at the pic you can see by the screws were it lifted up, I paln on e-mailing them about this product.
This was my first purchase from them not sure if I will make any more.
The up side is it looks cool.
I just installed a new spedo face from L&M removed crome cover , remove 3 mounting screws from back, 6 small screws from back of cluster, cover lifts off, with 2 fingers pulled spedo needle off (scary if I screw this up $$ to fix) pulled off fine with a little pressure, 2 small screws on face remove pull face off ,insert new and put 2 small screws back, reinstall spedo needle to the 0 possition learned that by trail and error , place face back on with screws remount place crome cover on and done about 25 min.

Down side spedo face had to be filled to fit properly, when inserting the 2 screws to hold it in place the Vinal wants to pull off.
I was very disapointed in the quality of this product, looks like just cheap vinal over plactic not sure how this will hold in the sun over time , if you look cloase at the pic you can see by the screws were it lifted up, I paln on e-mailing them about this product.
This was my first purchase from them not sure if I will make any more.
The up side is it looks cool.