Joined
·
968 Posts
Well, I finaly got it wired up.
STOP!
1 - 19 of 19 Posts
Joined
·
968 Posts
This is how I hid the wires.
1. Drilled a hole in the swingarm
2.Machined off part of the adjuster for clearance.
3. Drilled hole in plate to run wires through.
1. Drilled a hole in the swingarm
2.Machined off part of the adjuster for clearance.
3. Drilled hole in plate to run wires through.
Attachments
Joined
·
968 Posts
Here's some more if you can see them through the add banners?
Attachments
Joined
·
2,114 Posts
That's awesome
Joined
·
133 Posts
Looks great!
Joined
·
968 Posts
You cant touch this! ;D " Guy jumpin around in work out pants"
Joined
·
2,531 Posts
8) Nice idea. I ran mine under the swing arm. Double sided tape to hold the wires. Used two LED light bolts from http://rover.ebay.com/rover/0/e1140...tem=300745088227&ssPageName=ADME:L:OC:US:3160
Sad to say but one worked and one didn't. On the bright side, I talked with them and one is going out as of last week.
Sad to say but one worked and one didn't. On the bright side, I talked with them and one is going out as of last week.
Joined
·
968 Posts
Smoken - It's not only my tag light, but brake,running,and tag!
Joined
·
968 Posts
Smoken - It actually has two in it with a divider between them, and a clear window on the bottom to let the running light out onto the plate.
It's a cool little light,all stainless and glass!
It's a cool little light,all stainless and glass!
Joined
·
213 Posts
Where did u get the bracket and light from?
Real nice set up!
Real nice set up!
Joined
·
968 Posts
I made it, and got the light off ebay 
Joined
·
213 Posts
Nice!!!!
1 - 19 of 19 Posts
