[deputystryker]

Hello, I just got in my swingwing pags and my 8814 adapters. When you all installed your wing pegs did you use the shims? Did you reuse the spring that were in the stock pegs? Are these pegs suppose to fold up like the stock pegs do when going around a corner or tight corner? Just curious because I left the springs out and put one shim on each side. The right side(brake side) folds a little the left side(gear shift) doesnt fold at all. Do i need to fix this by adding the springs, removing the shims.

All do you all have your pegs flat or angles back? Im 511 in height.

Thanks for your help

 

[Skwerlee]

i didn't use the shims. took me about 30 minutes to figure out that the shims they supply weren't gonna work. use the stock spring and they should fold up just like the stock ones do.

 

[Aelway7]

i didn't use the shims. took me about 30 minutes to figure out that the shims they supply weren't gonna work. use the stock spring and they should fold up just like the stock ones do.

X2.

 

[stryk-ed]

x3

they should fold up like the stock pegs

 

[Raven]

x4


Happy Dragging!

 

[deputystryker]

Ok thanks for the help.

Now do you mount them flat or at an angle, I understand that it's a matter of preference but I'm curious on how you mounted yours. I would think at an angle to get the swing peg in a higher position instead.

 

[stryk-ed]

I played some with mine. I ended up putting them at a little bit of an angle. It all depends how your feet are most comfortable when you ride.

 

[Aelway7]

I have a little it of an angle as well

 

[strykenshane]

I adjusted my controls and have mine at an angle as well, took a little trial and error to get it exactly as I wanted it

 

[johnboy]

One spline above parralell (angled) for me.

 

[Skwerlee]

I have mine adjusted at a slight angle. I have the 2 1/4" drop so they drag excessively in corners if i have them at too much of a angle.

 

[johnboy]

I drag mine from time to time also but the new 240 tire actually gave me more clearance.

 

[Skwerlee]

I drag mine from time to time also but the new 240 tire actually gave me more clearance.

same here the 240 definitely helps

 

[middleagecrisis]

Super easy to drag, but I would not trade them for the world. They are super comfortable in the closed position. I haven't even opened them yet (partly because I'm too **** short with the 3 inch forward controls).