Yamaha Star Stryker banner

Vance and hines exhaust issues

1773 Views 5 Replies 4 Participants Last post by  krull
Anyone have issues replacing the baffles in the vance and hines exhaust for the 15 stryker? Got the old ones out the new ones won't go in. Now I'm stuck with a vance and hines with no baffles way too loud to ride.
1 - 2 of 6 Posts
Yup been there when I went from quiet to competition baffles it was a challenge. I ended up using a 2” brass wire wheel and I have a flexible extension that is 12” long for my drill a few passes then I fired it up to blow out the carbon deposits, and the new baffles fit in tightly perfect. Never looked back!
Probably going to have to get a shop to do it. It went in about half way and jammed then tore coming out. I'm just defeated right now. Debating if I need to spend 700 on a new exhaust.
Creative arts Human leg Fashion accessory Pattern Carmine
See less See more
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.