[spellcast1]

reading all this about the tuner issues - what happened to those who put the transistor inline on the O2 sensor ? good ,bad,indifferent ?

 

[8sec-z]

reading all this about the tuner issues - what happened to those who put the transistor inline on the O2 sensor ? good ,bad,indifferent ?

I did the resistor mod. It simply smoothes out the jerks n bucks our bikes have at low rpm.
It is not supposed to be a tuner nor replace a tuner. It's no magical fix. I feel it is worth the time for the mod. I have a ton of extra resistors. If anyone wants one, pm me and I will give you one for free as long as you send me a SASE.

 

[SmokenJoe]

Where are the instructions for the transistor fix?

 

[middleagecrisis]

What is a SASE? ???

 

[bozzly]

Self Address Stamped Envelope... ;D

 

[Saltyseafarer]

What is a SASE? ???

Self Addressed Stamped Envelope

 

[Xavier]

reading all this about the tuner issues - what happened to those who put the transistor inline on the O2 sensor ? good ,bad,indifferent ?

Considering the tuners cannot effect the fuel maps for the range that is effected by the RESISTOR TRICK, it won't interfere with a tuner.

Now, as I understand it, I think Cobra has a plug-in unit that is basically the same thing as the resistor trick except it costs about $50 rather than the $0.03 a resistor costs.

Here's a link to the thread I created on here outlining what needs done. http://www.yamahastarstryker.com/index.php/topic,676.msg8850.html

 

[SmokenJoe]

Thanks 8sec-z. Got the resistor.

 

[clar2001]

I just bought 400 of these coming from LA did not need all that but they sell in quanity (Vishay 825K Ω Ohm 1% 0805 (2012) SMD) Resistors -400pcs
Now Im going to try to find a extinshion piece for the O2 sensor so I dont have to cut the stock one.

 

[clar2001]

http://vstar1300.pbworks.com/w/page/5760698/Jack's O2 Mod

 

[clar2001]

Food for thought here ?
http://www.ebay.com/itm/Oxygen-o2-s...01?pt=UK_Motorcycle_Parts&hash=item3cb0f9a9c5

 

[venjurak]

Food for thought here ?
http://www.ebay.com/itm/Oxygen-o2-s...01?pt=UK_Motorcycle_Parts&hash=item3cb0f9a9c5

This looks interesting but it is in Greece and I have not had good luck ordering anything from Ebay that was overseas.

 

[SmokenJoe]

Food for thought here ?
http://www.ebay.com/itm/Oxygen-o2-s...01?pt=UK_Motorcycle_Parts&hash=item3cb0f9a9c5

This looks interesting but it is in Greece and I have not had good luck ordering anything from Ebay that was overseas.

I asked him a question if the O2 sensor eliminator would work on the Stryker. We'll see.

 

[SmokenJoe]

Food for thought here ?
http://www.ebay.com/itm/Oxygen-o2-s...01?pt=UK_Motorcycle_Parts&hash=item3cb0f9a9c5

This looks interesting but it is in Greece and I have not had good luck ordering anything from Ebay that was overseas.

I asked him a question if the O2 sensor eliminator would work on the Stryker. We'll see.

This is what I got back from the seller.
I haven't tested it on this model but if it shares the same eliminator with the midnight star then it will fit. You can send me a photo of the connector of the oxygen sensor and I will tell you if it fits. My email address is [email protected]
Anyone have a picture of the stock O2 sensor? Post it here or e-mail it to me and I'll pass it along to him. Or just e-mail him.

 

[clar2001]

Food for thought here ?
http://www.ebay.com/itm/Oxygen-o2-s...01?pt=UK_Motorcycle_Parts&hash=item3cb0f9a9c5

This looks interesting but it is in Greece and I have not had good luck ordering anything from Ebay that was overseas.

yeal I would not buy from over seas myself that was just a general reference for a product , the reason I purchased 400 resistors $2.65 is they came from LA the lesser quanity came from overseas.

 

[clar2001]

Man I have googled half the day I'm trying to fing a extision piece for the cable/wirring on the o2 sensor so I don't have to cut the stocker no luck so far any help woulp be great .????

 

[Natedog]

Try your local parts store. They may have replacement plastic plugs and the metal bits that go on the end of the wires. Then just cut some wires to the length you need and make your own extension harness.

Its an option.

I did something similar on my old HID kit. I just did a search for H7 connectors and a bunch of stuff came up.

 

[Natedog]

Here you go

http://www.ebay.ca/itm/4-Pins-Electrical-Wire-Connector-Terminal-Cable-Truck-Motorcycle-ATV-5kits-/140633055757?pt=Boat_Parts_Accessories_Gear&hash=item20be62220d

 

[clar2001]

Here you go

http://www.ebay.ca/itm/4-Pins-Electrical-Wire-Connector-Terminal-Cable-Truck-Motorcycle-ATV-5kits-/140633055757?pt=Boat_Parts_Accessories_Gear&hash=item20be62220d

Thanks Nate I appreachate the research , I hoping to find a OEM style plug that will be weather tite ,like a 4-6 inch extension.

 

[Ben-Rod]

Want to thank 8sec-z for sending me a resistor...Now I just need to know is there any certian direction it should be wired in?


Ben